Philips HTS3544, HTS3555 user manual Speakers Volume, Speakers Delay, Hdmi Audio, All

Setup Menu Options (continued)

Audio Setup Page (underlined options are the factory default settings)

Speakers Volume	Access the speaker’s level setup menu. Use		keys to adjust
	the volume level for each connected speaker between -6dB to
	+6dB. See ‘Getting Started - Setting the speakers’ channels’
	for details.
Speakers Delay	Access the speaker’s distance setup menu. Use		keys to set
	the delay times for the center and rear speakers based on the
	listening position and distance. See ‘Getting Started - Setting
	the speakers’ channels’ for details.
	Note: 1 ms increase/decrease of delay time is equivalent to one (1) foot
	change in distance. Use the longer delay time settings when the rear
	speakers are closer to the listener than the front speakers.
HDMI Audio	This setting is only required if you are using the HDMI OUT
	jack to connect your TV or other display device (see
	‘Option 4: Connecting to a HDMI-compatible TV’.)
	{ Off }	– Turn off the HDMI audio output. You
		can still enjoy the sound output through
		the speaker system.
	{ All }	– The HDMI audio output will be same as
		the audio stream being played back. In
		the case when the playback audio format
		is not supported, the audio output will be
		changed to PCM (Pulse Code Modulation)
		automatically.

{PCM only } – Downmix the audio signals to linear-PCM (2-channel.)

Notes:

–It may take a while for this unit and the input device to communicate and initialize.

–It is not possible to listen to SACDs or copy-controlled DVD-Audio CPPM (Content Protection for Playable Media) sources using the HDMI connection.

English

39