Philips HTS3544, HTS3555 Radio Operations, Tuning to radio stations, Presetting radio stations

Before you start ...

Make sure the FM and AM/MW antennas are connected.

Tuning to radio stations

A Press SOURCE repeatedly until ‘FM’ appears on the display panel (or press RADIO on the remote control.)

B Press and hold W / X on the remote control to start tuning.

ÎThe frequency indication starts to change until a radio station with suf￿cient signal strength is found.

C Repeat step B if necessary until you ￿nd the desired radio station

D To ￿ne-tune the reception of a weak station, press S / T brie￿y and repeatedly until an optimal reception is found.

Radio Operations

Presetting radio stations

You can store up to 40 FM and 20 AM/ MW preset radio stations in the memory. There are three different ways to program the radio stations:

–Using auto install (for ￿rst time setup only)

–Using automatic preset

–Using manual preset

Helpful Hints:

–This unit exits presetting mode if no button is pressed within 20 seconds.

–If no stereo signal is detected or less than

5 (￿ve) stations are detected during radio installation, ‘CHECK FM ANTENNA’ appears.

Using auto install

When you access the ‘RADIO’ mode for the very ￿rst time, you will be prompted to install the radio stations. With this feature, you can install all the available radio station automatically with one touch of button.

RADIO

A Press RADIO.

ΑAUTO INSTALL ... PRESS PLAY’ appears.

English

45