Pelco CM9700UTP32A manual CM9700UTP16A Back Panel

BACK PANEL

Figure 3. CM9700UTP16A Back Panel

100-240 VAC 50-60Hz 75A

1 17	2 18	3 19	4 20	5 21	6 22	7 23	8 24	9 25	10 26	11 27	12 28	13 29	14 30	15 31	16 32	TO MXB	1-4	5-8	9-12	13-16
																	17-20	21-24	25-28	29-32

Figure 4. CM9700UTP32A Back Panel

ìAC Power Connector: Connects the UTP receiver to the mains power supply (100 to 240 VAC, 50 to 60 Hz, autoranging).

îBNC Connectors: There are 16 or 32 coaxial video outputs (depending on model) for each unit. BNC connectors on both models are numbered right to left. The 16-channel unit is numbered 1 to 16; the 32-channel unit is numbered 1 to 16 and 17 to 32.

ïRibbon Cable Connectors: Connects to a CM9700 Series matrix for video output.

ñRJ-45 Connectors: Video input from either the TW3016-PATCH1, TW3032-PATCH1, or wire assembly cable (part #WA01-5104-005AG). Each connector has eight pins for UTP connection.

C3646M-C (6/09) 9