Description
The WCS Series consists of
WCS Series models are available with either glass fuses or
•Glass fuses provide more protection than circuit breakers because they act faster and are more precise. However, they are designed for
•Circuit breakers reset themselves when the fault is corrected, which eliminates the need to replace fuses. However, they react more slowly, are affected by temperature, and are not as accurate. The amount of current required to trip one can vary as much as 100 percent.
Since circuit breaker models do not require fuses and automatically reset themselves after the fault is corrected, the breakers are not accessible.
MODELS
Model Number
Outputs
Supply Current | (Amps) |
Max Current Per Channel (Amps)
Input Voltage | (VAC) |
Output Voltage | (VAC) |
Fuses
Circuit Breakers
Surge Protection
Class 2 Output
On/Off Switch
Power LED
4
4
20
12
8
3
120/240
120/240
24, 28
24, 28
X
X
X
X
X
X
X
X
X
APPLICATION EXAMPLES
Table A contains examples of products and the number of units that can be powered by each power supply, and is based on the VA rating of each product.
Table A. Product Capacity
Product |
| WCS4/20B |
|
|
|
Traditional Camera (6 VA avg.) | 4 | 4 |
Outdoor Camclosure (4 VA) | 4 | 4 |
Outdoor IP Camclosure (21.6 VA) | 4 | 4 |
Indoor Spectra (30 VA) | 4 | 4 |
Outdoor Spectra (75 VA) | 4 | 4 |
Esprit without wiper or IOC/IOP (50 VA) | 4 | 4 |
24 V PT780 Legacy System (P/T, Enclosure, Receiver, Camera, Defroster) |
|
|
without heaters (90 VA) | 4 | NA |
with heaters (140 VA) | 3 | NA |
with heaters and P/T heater blanket (180 VA) | 2 | NA |
4 | 4 | |
Esprit TI (70 VA) | 4 | 4 |
ExSite (120 VA) | 3 | NA |
|
|
|
4 |