Sun Microsystems X4150 manual How to Add a DVD/USB Drive, Test Installed DIMMs

Page 6

Test Installed DIMMs

Verify that the server can see all installed DIMMs.

Testing Installed Memory

Reassemble the server and use one of the following methods to verify the DIMMs:

Boot from the Tools and Drivers DVD and access the diagnostics by selecting the option to run hardware diagnostics (option 1).

Log in to the service processor’s (SP) ILOM using ssh or a browser and the IP address of the SP.

How to Add a DVD/USB Drive

The server ships with filler panels for a vacant DVD drive slot and each vacant HD slot.

You must install the DVD drive/USB hub before you install the hard drives.

Adding a DVD/USB Drive Unit

1Eject all hard drives and HD filler panels.

2Remove the DVD filler panel.

4 Sun Fire X4150 Configuration Guide • March 2009

Image 6
Contents Sun Fire Volume Configuration Guide Page How to Add Components to Your Limited Configuration Server How to Add Memory DIMMs Install DIMMs in Matched Part Number Pairs OnlyInstall Larger Capacity DIMMs in Lower-Numbered Slots How to Add Components to Your Limited Configuration Server How to Add a DVD/USB Drive Test Installed DIMMsHow to Add SAS Hard Drives SAS HD Installation RulesVerify Hard Drives HD2 HD4 HD5 HD6Initializing the Disks How to Add and Test PCIe Cards Test Hard DrivesHow to Check and Update Your Firmware Firmware Update NotesSun Fire X4150 Configuration Guide March
Related manuals
Manual 150 pages 45 Kb Manual 82 pages 14.38 Kb