Sun Microsystems X4150 manual How to Add Components to Your Limited Configuration Server

Page 3

How to Add Components to Your Limited Configuration Server

Test the Current Configuration

Always test the current configuration before upgrading the server.

Testing the Current Configuration

1Ensure that all internal components are properly seated and install the cover.

2Boot the server using the server’s Tools and Drivers CD/DVD.

3The server should pass POST and boot to the Tools and Drivers CD’s main menu.

4Troubleshoot any front panel fault indicators before customizing the server.

Adding Components to the Server

The component installation procedures in this document contain important installation and validation information that can assist you in successfully configuring the server.

1

Image 3
Contents Sun Fire Volume Configuration Guide Page How to Add Components to Your Limited Configuration Server How to Add Memory DIMMs Install DIMMs in Matched Part Number Pairs OnlyInstall Larger Capacity DIMMs in Lower-Numbered Slots How to Add Components to Your Limited Configuration Server Test Installed DIMMs How to Add a DVD/USB DriveSAS HD Installation Rules How to Add SAS Hard DrivesHD2 HD4 HD5 HD6 Verify Hard DrivesInitializing the Disks Test Hard Drives How to Add and Test PCIe CardsFirmware Update Notes How to Check and Update Your FirmwareSun Fire X4150 Configuration Guide March
Related manuals
Manual 150 pages 45 Kb Manual 82 pages 14.38 Kb