Sun Microsystems A3500FC manual 2x7 Cables and Connections, Scsi Cable Lengths

Page 49

3.42x7 Cables and Connections

This section contains information about SCSI, FC-AL, and power connections for two StorEdge A3500 controller modules, or two StorEdge A3500FC controller modules, with seven StorEdge D1000 disk arrays.

3.4.1SCSI Cable Lengths

The following tables show the lengths of each SCSI cable connected to the drive connections on the respective controller modules.

TABLE 3-8Controller Module A (2x7) Cables

SCSI Port Number	Cable Length	Part Number

1	0.8m/2.6 ft	530-1884
2	0.8m/2.6 ft	530-1884
3	0.8m/2.6 ft	530-1884
4	2.0m/6.5 ft	530-1885
5	2.0m/6.5 ft	530-1885

TABLE 3-9Controller Module B (2x7)

SCSI Port Number	Cable Length	Part Number

1	2.0m/6.5 ft	530-1885
2	0.8m/2.6 ft	530-1884
3	0.8m/2.6 ft	530-1884
4	2.0m/6.5 ft	530-1885
5	2.0m/6.5 ft	530-1885

The inboard IN/OUT connectors on each of the top four disk arrays are connected using a 0.2m/0.65 ft SCSI jumper cable, part number 530-1883.

The inboard IN/OUT connectors on the bottom three disk arrays are terminated with differential SCSI terminators, part number 150-1890.

Chapter 3 Sun StorEdge A3500/A3500FC Configurations 3-17

Image 49

Contents Sun StorEdge A3500/A3500FC Hardware Configuration Guide Please Recycle Contents Sun StorEdge A3500/A3500FC Configurations Sun StorEdge A3500 and A3500FCSpecifications Page How This Book Is Organized Using Unix CommandsShell Prompts Typographic ConventionsTable P-3Related Documentation Related DocumentationSun Welcomes Your Comments Sun Documentation on the WebScsi Host Connections Configuration Guidelines Single Host Connected to One Controller Module Supported Scsi Host Configurations2Two Controller Modules Daisy-Chained to One Host Two Controller Modules Daisy-Chained to One Host3Independent Controller Module Connected to Two Hosts Independent Controller Module Connected to Two HostsMulti-Host 4Two-Node Multi-Host ConfigurationUltra 2 Host System Power Connection Requirement Gain access to the AC power sequencers FC-AL Host Connections Differential Scsi terminators-HOST Supported FC-AL Host Configurations 2One Host Connected to One Controller Module Independent Controller Module Connected to Two Hosts 4Single Host Connected to One Controller Module Using Hubs Single Host Connected to One Controller Module Using HubsSingle Host Connected to Two Controller Modules Using Hubs 5Single Host Connected to Two Controller Modules Using Hubs FC-AL Host Connections Host Multi-Host Host Host adapter Setting the Loop ID Controller B 2 1 Dec Sun StorEdge A3500/A3500FC Configurations 1StorEdge D1000 Disk Array StorEdge D1000 Disk Array SettingsOption Switch 1 1x2 ConfigurationModule ID Switch 51x5 Option Switch Settings for StorEdge D1000 Disk Array 2 1x5 Configuration21x5 Module ID Switch Settings 82x7 Option Switch Settings for StorEdge D1000 Disk Array 3 2x7 Configuration32x7 Module ID Switch Settings 4 3x15 Configuration Scsi Jumper Cables and Terminators Driveside Scsi Connections 1x2 Cables and ConnectionsTerminator Power Connections 1x5 Cables and Connections Scsi jumper cable 16shows the power connections for 1x5 configurations Scsi Cable Lengths 2x7 Cables and ConnectionsController Module a 16shows the power connections for 2x7 configurations 3x15 Cables and Connections 11Controller Module B 3x15 Configuration Cables12Controller Module C 3x15 Configuration Cables 19shows the Scsi connections for controller module a 20shows the Scsi connections for controller module B 21shows the Scsi connections for controller module C Connections to AC Power Sources Connections Between Power Sequencers23Power Connections to Avoid Different Phases Power Connections for Expansion CabinetsPower connections for the 1x8 expansion cabinet are shown Page Initial Cold Start Surge Current Specifications Sun StorEdge A3500 and A3500FC SpecificationsTable A-2Cabinet Surge Current Specifications