FIGURE | Inserting the Cabinet Rail Adapter Plate on the Cabinet Rail | 32 |
| ||||||
FIGURE | Adapter plate in place on the Cabinet Rail. | 33 |
|
|
|
|
| ||
FIGURE | Slide the flange of the rail behind the cabinet rail and between that and the hook of the rail | ||||||||
| adapter plat.e, as shown. 34 |
|
|
|
|
|
|
|
|
FIGURE | Securing the Rail to the Front left of the Cabinet | 35 |
|
|
|
| |||
FIGURE | Adjusting the Length of the Rail at the Back of the Cabinet | 36 |
| ||||||
FIGURE | Securing the Rail to the Back of the Cabinet | 37 |
|
|
|
|
| ||
FIGURE | Positioning the Tray in the Cabinet 38 |
|
|
|
|
|
|
| |
FIGURE | Array Controller Tray Installed | 39 |
|
|
|
|
|
|
|
FIGURE | Rail clip and rear mounting hole on rear of array tray. | 40 |
|
|
| ||||
FIGURE | Securing the Tray to the Front of a Sun Rack 900/1000 Cabinet | 41 | |||||||
FIGURE | Expansion Ports on the Controller Tray | 42 |
|
|
|
|
|
| |
FIGURE | Expansion Ports on an Expansion Tray | 43 |
|
|
|
|
|
| |
FIGURE | 1x2 Array Configuration Cabling Example 45 |
|
|
|
|
| |||
FIGURE | 1x3 Array Configuration Cabling | 46 |
|
|
|
|
|
|
|
FIGURE | Ethernet Ports for Controller A and Controller B | 50 |
|
|
|
| |||
FIGURE | Direct connection from a single data host server | 53 |
|
|
|
| |||
FIGURE | Direct Connection from two data host servers 53 |
|
|
|
| ||||
FIGURE | Data host connection through a Fibre Channel switch | 53 |
|
| |||||
FIGURE | Mixed topology of data hosts connected directly and through FC switches 54 | ||||||||
FIGURE | Connecting the SFP and | 55 | |||||||
FIGURE | FC host connectors on the 2540 controller. | 55 |
|
|
|
|
| ||
FIGURE | Direct Connection From a Single Host With Dual HBAs | 56 |
|
| |||||
FIGURE | Direct connections from two data hosts with dual HBAs. | 57 |
|
| |||||
FIGURE | Direct connections from three data hosts with dual HBAs. | 57 |
| ||||||
FIGURE | SAS Data Host Ports (on back of tray). | 58 |
|
|
|
|
|
| |
FIGURE | Tray Power Connectors and Switches | 62 |
|
|
|
|
|
| |
FIGURE | Power Fan Assembly Locations. | 92 |
|
|
|
|
|
|
|
FIGURE | DC Power Connector Cable and Source Wires | 92 |
|
|
|
| |||
FIGURE | DC Power Module LEDs, Power Switch, and Power Cable Receptacle. 93 |
x Sun StorageTek 2500 Series Array Hardware Installation Guide • March 2007