Sun Microsystems X4150 manual To Redirect Storage Devices

Page 73

Note – For the mouse to work correctly, you might have to change the mouse mode. Click the double mouse cursor on the navigation bar to toggle between local and remote mouse cursor movement. Keyboard redirection is selected by default.

FIGURE 5-1Keyboard, Video, and Mouse Selections

You can click Submit to enable your options after each choice to observe the consequences, or continue directly to Step 4.

4.When you have completed your selections, click Submit to enable your options.

▼To Redirect Storage Devices

Use the following procedure to enable a storage device attached to your local workstation or laptop to serve as a storage device for a server. You can use this option to install software from a local CD/DVD drive to multiple remote servers.

You can also redirect a CD image file or a diskette image file stored on your hard drive.

1.Start the remote console application as described in “Starting the Remote Console Application” on page 54.

The Remote Console screen appears.

2.Select Storage from the drop-down list, and click Mount Device.

This enables the corresponding local storage device to connect to the remote server as though it were a storage device attached directly to that remote server.

3.Select a source device from the drop-down list.

Chapter 5 Using the Remote Console Application 57

Image 73

Contents Sun Microsystems, Inc Page Contents To Access the Elom Using a Web Browser To Clear the Event Log Using the Remote Console Application Using the Command-Line Interface Using IpmiUsing Simple Network Management Protocol Glossary Index Command-LineInterface ReferencePage Figures Page How This Document Is Organized PrefaceUsing Unix Commands Related Documentation Typographic ConventionsThird-Party Web Sites Sun Documentation, Support, and TrainingSun Welcomes Your Comments Sun Fire X4150 server Elom Overview Embedded Lights Out Manager Common Tasks Sun Fire X4150 server Elom Features1ELOM Common Tasks 2SP Controller and Firmware Default Settings Sun Fire X4150 server Default SettingsAbout the Indicator and Fault LEDs About the Preconfigured Administrator AccountConnecting to the Elom To Connect Using a Serial Connection Connecting Using a Serial Connection1Methods of Connecting to the Elom About Connection TasksEnter the following command Connecting Using EthernetLog in to the CLI Enter the following command -exit Connecting to the CLIClick the Log Out button Click LogPage Using the Web-Based Interface Monitoring the Server System Using the Web-Based InterfaceUsers and Privileges Browser and Software RequirementsWeb-Based Interface Tasks To Access the Elom Using a Web Browser Accessing the Elom Using a Web Browser1ELOM Tab Detail Choices Viewing the System From the Web BrowserUser Management To View System Information Viewing System and Component InformationViewing Version Information To View SP Version Information On the main menu, click the System Information tab3Sample Server Board Information Viewing Component Information To View CPU Information4Sample CPU Information Viewing Memory Information To View Memory Information Monitoring the System Sensors5Sample Memory Information 6Sample Memory for DIMMA0Reading Sensors To Read Sensors To Monitor the System SensorsOn the main menu, click System Monitoring From the Sensor Reading tab, select the Summary tab Viewing a Sensor Summary To View a Sensor SummaryCPU 0 Temp Too high From the Sensor Reading tab, select the Temperature tab Monitoring Temperatures To Monitor TemperaturesMonitoring Fans To Monitor Fans From the Sensor Reading tab, select the Fan tabViewing and Managing the Event Log Monitoring Voltages To Monitor VoltageFrom the Sensor Reading tab, click the Voltage tab 14Sample of the Voltage Monitor ScreenTo View the Event Logs To Display the Event LogTo Save the Event Log From the Event Logs tab, select View Event LogsTo Clear the Event Log Chapter Configuring the System From the main menu, click the Configuration tab To Configure the SystemTo Configure E-mail Notification Configuring E-mail NotificationConfiguring Platform Event Filters From the Configure submenu, click the Network tabTo Configure a Platform Event Filter Options are Ffh All sensors To access the System Management Access Submenus Configuring System Management AccessClick Submit to create the filter Click Generate to create a new CSR Configuring Snmp1Example of Required SSL Information To Add an Snmp Community To Configure SnmpTo Modify an Snmp Community To Delete an Snmp CommunityTo Add an Snmp User To Delete an Snmp User Configuring Active Directory ServiceTo Edit an Snmp User Click Submit to create the new userManaging and Maintaining the System To Configure Active Directory ServiceManaging Users and Accounts To Add a User 3The User Management Screen Type a password in the Password fieldTo Disable or Enable a User To Change a User Password or PrivilegeTo Delete a User Account To Control the State of the System Indicator LED Managing the System Locator Indicator LEDManaging the Front Panel and On-Board Fault LEDs To Turn the Fault LEDs Off To View the State of the Fault LEDsTo Set Power Control Setting Power ControlResetting the Service Processor To Reset the Service ProcessorClick Reset SP button Updating the Firmware Using a Web BrowserUpdating the Firmware Recovering from a Corrupt SP To Update the Firmware Using a Web BrowserSelect the firmware file or Cpld file to update To Recover From a Corrupt SP To Set the Session Timeout Managing Session TimeoutTo Disable the Session Timeout Click the Submit button to set the session timeoutFrom the Configuration submenu, click the Set Time tab Setting the Time To Set the TimePage Requirements Accessing the Remote ConsoleCD and Diskette Redirection Operational Model 1Client Installation Requirements2Remote Console Operation With DVD Drive and Diskette Drive Starting the Remote Console Application Click LoginTo Start the Remote Console Application Click LaunchFrom the Remote Control submenu, select Hotkey Setup Setting Parameters for the Remote ConsoleTo Set Parameters for the Remote Console To Redirect Keyboard and Mouse Devices Redirecting Keyboard, Video, Mouse, or Storage DevicesSelect a source device from the drop-down list To Redirect Storage DevicesTo Install an OS on a Remote Server Using a Virtual CD-ROM Installing an Operating System on a Remote ServerType the user name and password in the login screen Other Remote Options Page About Ipmi Using IpmiSensors IPMItool1Supported Ipmi 2.0 Commands Supported Ipmi 2.0 CommandsGeneral Commands 2Supported Ipmi 2.0 CommandsFRU Device Commands Serial/Modem Device Commands 2Supported Ipmi 2.0 Commands Page Logging In to the CLI Using the Command-Line InterfaceSyntax Command Syntax2CLI Options 1CLI Command VerbsManaging the Host State Managing the HostViewing Host Sensors Managing the Host ConsoleTo Display Network Settings Managing Elom Network SettingsTo Configure Network Settings Targets, Properties, and Values Managing Local User Accounts WithTo Display User Accounts Using the CLI To Delete a User Account Using the CLIEnter the following command delete /SP/users/username Enter the following command show /SP/usersConfiguring User Accounts Displaying Alerts Managing AlertsTo Display Alerts Output of the show command appears Configuring Alerts Configuring the PEF Global Controls Configuring the Event Filter Tables To Configure the PEF Global ControlsTo Configure the Event Filter Tables Result of executing the show command appears To Display the Current SP Version Information Displaying Version InformationTo update the firmware, enter one of the following commands To Update the FirmwareUpdating the Firmware Select Yes to continue, or No to exit Start the Tftp downloadPage How Snmp Works About SnmpMIBs Integration Snmp MIB Files1Sun Server MIB Tree Snmp MessagesConfiguring Receipt of Snmp Traps Configuring Snmp on the ElomManaging Snmp User Accounts Adding Your Server to Your Snmp Environment1SNMP Targets, Properties, and Values Deleting a User AccountShow Table A-1Command Syntax and Usage CLI Command Quick ReferenceTable A-3User Commands Table A-2General CommandsTable A-4Network and Serial Port Setting Commands Table A-6SNMP Commands Table A-5Alert CommandsTable A-7System Start, Stop, and Reset Commands Set /SYS/CtrlInfo PowerCtrl=reset CLI Command Reference Example CreateDelete Table A-9delete Command TargetsExit Usage load -source URL target HelpSet Table A-10set Command Targets, Properties, and ValuesSP/AgentInfo/SNMP/user ShowStart Start Command TargetTable A-12stop Command Target ResetStop Version Page Address Resolution Access control listAdvanced Configuration Power Interface GlossaryAdvanced Technology Advanced Programmable Interrupt ControllerAdvanced Technology Attachment Packet Alert Standard FormatCertificate Authority Bios BasicCommon Information Command-line interfaceCoordinated Universal Customer-replaceableDomain name server Domain name service Direct memory accessDigital Signature Distinguished NameDynamic random access Dynamic Host Configuration ProtocolDomain Name System Dual inline memory Electrically erasable programmable read- only memoryExternally initiated Erasable programmable read-only memoryFibre Channel Arbitrated Loop Field-replaceable unitFully qualified domain File Transfer ProtocolGrand Unified Graphical user interfaceHypertext Transfer Protocol Secure Hypertext TransferIn-band system Internet Control Message Protocol Intelligent Platform Management InterfaceInternet Protocol IP Interrupt requestJumpStart Java Web StartKeyboard Controller Keyboard, video, mouse, storageLightweight Directory Access Protocol Ldap Lightweight Directory Access ProtocolMedia access control Local area networkNetwork file system Nonvolatile random access memoryNetwork Information Network interface cardOut-of-band OOB Object identifierPeripheral Component Peripheral InterfacePreboot Execution Power-on self-testPlatform Event Filter Platform Event TrapProgrammable read- only memory Redundant array of independent disks Remote procedure callRemote Management Control Protocol Sensor data record Secure Sockets LayerSerial Attached Scsi Server Message BlockSmall Computer System Interface Simple Network Management ProtocolSpanning Tree Protocol System event logTransmission control Uninterruptible powerTransmission Control Protocol/Internet Trivial File TransportUserID a unique string identifying a user to a system User identificationUser identification number UID Voltage regulatorPage Index LED Index

Related manuals

Manual 12 pages 7.65 Kb

Manual 82 pages 14.38 Kb