Sun Microsystems Sun Fire X4150 server Elom Features, Embedded Lights Out Manager Common Tasks

Page 18

Sun Fire X4150 server ELOM Features

The ELOM provides a dedicated system of hardware and supporting software that enables you to manage your server independent of an operating system, and in low- power situations. ELOM is composed of four components:

■Web-based interface (requires JavaR v5 or later)

■Command-line Interface (accessed via serial or ethernet using ssh)

■IPMI v2

■SNMP v3

You can access the ELOM using a web browser, secure shell (SSH), or via the Sun Fire X4150 server’s serial port. Your server’s default network setting is configured as DHCP for easy access via a web browser or SSH, and the ELOM output is directed by default to the serial port.

Embedded Lights Out Manager Common Tasks

The following table shows common tasks and the management interfaces used to perform each task.

TABLE 1-1ELOM Common Tasks

 

 

Web-

 

 

 

 

Based

 

 

Task

IPMI

Interface

CLI

SNMP

 

 

 

 

 

Redirect the system graphical console to a remote client

-

Yes

-

-

web browser.

 

 

 

 

Connect a remote diskette drive to the system as a

-

Yes

-

-

virtual diskette drive.

 

 

 

 

Connect a remote CD-ROM drive to the system as a

-

Yes

-

-

virtual CD-ROM drive.

 

 

 

 

Monitor system fans, temperatures, and voltages

Yes

Yes

Yes

Yes

remotely.

 

 

 

 

Monitor system BIOS messages remotely.

Yes

Yes

Yes

-

Monitor system operating system messages remotely.

Yes

Yes

Yes

-

 

 

 

 

 

2 Sun Fire X4150 Server Embedded Lights Out Manager Administration Guide • September 2007

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Sun Microsystems, Inc Page Contents To Access the Elom Using a Web Browser To Clear the Event Log Using the Remote Console Application Using Ipmi Using the Command-Line InterfaceUsing Simple Network Management Protocol Command-LineInterface Reference Glossary IndexPage Figures Page Preface How This Document Is OrganizedUsing Unix Commands Typographic Conventions Related DocumentationSun Documentation, Support, and Training Third-Party Web SitesSun Welcomes Your Comments Sun Fire X4150 server Elom Overview Sun Fire X4150 server Elom Features Embedded Lights Out Manager Common Tasks1ELOM Common Tasks Sun Fire X4150 server Default Settings 2SP Controller and Firmware Default SettingsAbout the Preconfigured Administrator Account About the Indicator and Fault LEDsConnecting to the Elom 1Methods of Connecting to the Elom Connecting Using a Serial ConnectionTo Connect Using a Serial Connection About Connection TasksConnecting Using Ethernet Enter the following commandLog in to the CLI Connecting to the CLI Enter the following command -exitClick Log Click the Log Out buttonPage Monitoring the Server System Using the Web-Based Interface Using the Web-Based InterfaceBrowser and Software Requirements Users and PrivilegesWeb-Based Interface Tasks Accessing the Elom Using a Web Browser To Access the Elom Using a Web BrowserViewing the System From the Web Browser 1ELOM Tab Detail ChoicesUser Management Viewing Version Information To View SP Version Information Viewing System and Component InformationTo View System Information On the main menu, click the System Information tabViewing Component Information To View CPU Information 3Sample Server Board Information4Sample CPU Information 5Sample Memory Information Monitoring the System SensorsViewing Memory Information To View Memory Information 6Sample Memory for DIMMA0To Monitor the System Sensors Reading Sensors To Read SensorsOn the main menu, click System Monitoring Viewing a Sensor Summary To View a Sensor Summary From the Sensor Reading tab, select the Summary tabCPU 0 Temp Too high Monitoring Fans To Monitor Fans Monitoring Temperatures To Monitor TemperaturesFrom the Sensor Reading tab, select the Temperature tab From the Sensor Reading tab, select the Fan tabFrom the Sensor Reading tab, click the Voltage tab Monitoring Voltages To Monitor VoltageViewing and Managing the Event Log 14Sample of the Voltage Monitor ScreenTo Save the Event Log To Display the Event LogTo View the Event Logs From the Event Logs tab, select View Event LogsTo Clear the Event Log Chapter Configuring the System To Configure the System From the main menu, click the Configuration tabConfiguring Platform Event Filters Configuring E-mail NotificationTo Configure E-mail Notification From the Configure submenu, click the Network tabTo Configure a Platform Event Filter Options are Ffh All sensors Configuring System Management Access To access the System Management Access SubmenusClick Submit to create the filter Configuring Snmp Click Generate to create a new CSR1Example of Required SSL Information To Configure Snmp To Add an Snmp CommunityTo Delete an Snmp Community To Modify an Snmp CommunityTo Add an Snmp User To Edit an Snmp User Configuring Active Directory ServiceTo Delete an Snmp User Click Submit to create the new userTo Configure Active Directory Service Managing and Maintaining the SystemManaging Users and Accounts To Add a User Type a password in the Password field 3The User Management ScreenTo Change a User Password or Privilege To Disable or Enable a UserTo Delete a User Account Managing the System Locator Indicator LED To Control the State of the System Indicator LEDManaging the Front Panel and On-Board Fault LEDs To View the State of the Fault LEDs To Turn the Fault LEDs OffResetting the Service Processor Setting Power ControlTo Set Power Control To Reset the Service ProcessorUpdating the Firmware Using a Web Browser Click Reset SP buttonUpdating the Firmware To Update the Firmware Using a Web Browser Recovering from a Corrupt SPSelect the firmware file or Cpld file to update To Recover From a Corrupt SP To Disable the Session Timeout Managing Session TimeoutTo Set the Session Timeout Click the Submit button to set the session timeoutSetting the Time To Set the Time From the Configuration submenu, click the Set Time tabPage Accessing the Remote Console Requirements1Client Installation Requirements CD and Diskette Redirection Operational Model2Remote Console Operation With DVD Drive and Diskette Drive To Start the Remote Console Application Click LoginStarting the Remote Console Application Click LaunchSetting Parameters for the Remote Console From the Remote Control submenu, select Hotkey SetupTo Set Parameters for the Remote Console Redirecting Keyboard, Video, Mouse, or Storage Devices To Redirect Keyboard and Mouse DevicesTo Redirect Storage Devices Select a source device from the drop-down listInstalling an Operating System on a Remote Server To Install an OS on a Remote Server Using a Virtual CD-ROMType the user name and password in the login screen Other Remote Options Page Using Ipmi About IpmiIPMItool SensorsSupported Ipmi 2.0 Commands 1Supported Ipmi 2.0 Commands2Supported Ipmi 2.0 Commands General CommandsFRU Device Commands Serial/Modem Device Commands 2Supported Ipmi 2.0 Commands Page Using the Command-Line Interface Logging In to the CLICommand Syntax Syntax1CLI Command Verbs 2CLI OptionsManaging the Host Managing the Host StateManaging the Host Console Viewing Host SensorsManaging Elom Network Settings To Display Network SettingsTo Configure Network Settings Managing Local User Accounts With Targets, Properties, and ValuesEnter the following command delete /SP/users/username To Delete a User Account Using the CLITo Display User Accounts Using the CLI Enter the following command show /SP/usersConfiguring User Accounts Managing Alerts Displaying AlertsTo Display Alerts Output of the show command appears Configuring Alerts Configuring the PEF Global Controls To Configure the PEF Global Controls Configuring the Event Filter TablesTo Configure the Event Filter Tables Result of executing the show command appears Displaying Version Information To Display the Current SP Version InformationTo Update the Firmware To update the firmware, enter one of the following commandsUpdating the Firmware Start the Tftp download Select Yes to continue, or No to exitPage About Snmp How Snmp WorksSnmp MIB Files MIBs IntegrationSnmp Messages 1Sun Server MIB TreeManaging Snmp User Accounts Configuring Snmp on the ElomConfiguring Receipt of Snmp Traps Adding Your Server to Your Snmp EnvironmentDeleting a User Account 1SNMP Targets, Properties, and ValuesShow CLI Command Quick Reference Table A-1Command Syntax and UsageTable A-2General Commands Table A-3User CommandsTable A-4Network and Serial Port Setting Commands Table A-5Alert Commands Table A-6SNMP CommandsTable A-7System Start, Stop, and Reset Commands Set /SYS/CtrlInfo PowerCtrl=reset CLI Command Reference Create ExampleTable A-9delete Command Targets DeleteExit Help Usage load -source URL targetTable A-10set Command Targets, Properties, and Values SetShow SP/AgentInfo/SNMP/userStart Command Target StartReset Table A-12stop Command TargetStop Version Page Advanced Configuration Power Interface Access control listAddress Resolution GlossaryAdvanced Technology Attachment Packet Advanced Programmable Interrupt ControllerAdvanced Technology Alert Standard FormatBios Basic Certificate AuthorityCoordinated Universal Command-line interfaceCommon Information Customer-replaceableDigital Signature Direct memory accessDomain name server Domain name service Distinguished NameDomain Name System Dual inline memory Dynamic Host Configuration ProtocolDynamic random access Electrically erasable programmable read- only memoryFibre Channel Arbitrated Loop Erasable programmable read-only memoryExternally initiated Field-replaceable unitGrand Unified File Transfer ProtocolFully qualified domain Graphical user interfaceHypertext Transfer Hypertext Transfer Protocol SecureIn-band system Internet Protocol IP Intelligent Platform Management InterfaceInternet Control Message Protocol Interrupt requestKeyboard Controller Java Web StartJumpStart Keyboard, video, mouse, storageMedia access control Lightweight Directory Access ProtocolLightweight Directory Access Protocol Ldap Local area networkNetwork Information Nonvolatile random access memoryNetwork file system Network interface cardPeripheral Component Object identifierOut-of-band OOB Peripheral InterfacePlatform Event Filter Power-on self-testPreboot Execution Platform Event TrapProgrammable read- only memory Remote procedure call Redundant array of independent disksRemote Management Control Protocol Serial Attached Scsi Secure Sockets LayerSensor data record Server Message BlockSpanning Tree Protocol Simple Network Management ProtocolSmall Computer System Interface System event logTransmission Control Protocol/Internet Uninterruptible powerTransmission control Trivial File TransportUser identification number UID User identificationUserID a unique string identifying a user to a system Voltage regulatorPage Index LED Index
Related manuals
Manual 12 pages 7.65 Kb Manual 82 pages 14.38 Kb
Top Page Image Contents