Sun Microsystems SG-XPCIE2FCGBE-E-Z manual Removing the Hardware

Page 45

Removing the Hardware

The following procedures describe how to remove the HBA. Refer to your system installation or service manual for detailed HBA removal instructions.

The hardware removal process involves the following general steps:

1.Either halting the operating system and removing power from the server blade, or preparing the HBA for hot-plug removal with one of the following:

The HBA Attention button

The Solaris OS

2.Removing the HBA hardware.

To Prepare the HBA for Removal Using the HBA Attention Button

1.Attach an antistatic strap (refer to “Observing ESD and Handling Precautions” on page 9).

2.Press and release the Attention button near the bottom of the HBA front panel (see FIGURE 2-3).

The green Attention LED near the button will blink for approximately five seconds, indicating that the HBA is being prepared for removal.

If you want to cancel the operation, press the Attention button again before the LED stops blinking.

3.After the Attention LED goes dark, remove the HBA.

To Prepare the HBA for Hot-Plug Removal (for the Solaris OS)

If you want to remove the HBA without first halting the operating system and removing power from the associated server blade, prepare it for removal as follows:

Chapter 2 Hardware Installation and Removal

19

Image 45
Contents For HBA Model SG-XPCIE2FCGBE-E-Z Page Contents HBA Software Installation Contents Page USA-FCC Class a CanadaEuropean Union Page Safety Precautions Safety Agency Compliance StatementsBattery Warning Conformité aux normes de sécurité Modification du matériel SymbolesConformité Selv Connexion du cordon d’alimentationMise en garde relative au système en rack Mise en garde relative aux batteries Couvercle de lunitéEinhaltung sicherheitsbehördlicher Vorschriften SELV-Konformität LautstärkeAnschluss des Netzkabels Warnung bezüglich BatterienNormativas de seguridad Colocación de un producto Sun Modificaciones en el equipoNivel de ruido Cumplimiento de la normativa para instalaciones SelvAdvertencia sobre las baterías Cubierta de la unidad del sistemaAdvertencia sobre el sistema en bastidor Nordic Power Distribution Cautions Nordic Lithium Battery CautionsNordic Grounded Socket Cautions Page Regulatory Compliance Statements FCC Class a NoticeICES-003 Class a Notice Avis NMB-003, Classe a Bsmi Class a Notice CCC Class a NoticeGOST-R Certification Mark How This Document Is Organized Before You Read This BookShell Prompts Using Unix CommandsDocumentation, Support, and Training Typographic ConventionsSun Welcomes Your Comments Third-Party Web SitesHBA Features and Specifications Kit ContentsNvram 1HBA Features and Specifications2Supported Operating System/Technology Versions Operating System and Technology RequirementsSupported Operating System/Technology Versions System InteroperabilityHost Platform Support Storage Support3Platform and Operating System Support Tape Storage Support Switch SupportEnvironmental Requirements Software Support4Software Support 5HBA Environmental Requirements Observing ESD and Handling Precautions Hardware Installation and RemovalTo Install the HBA Installing the Hardware1Pulling Out the HBA Lever To Connect the Optical Cable 1Optical Cable SpecificationsConnect the other end of the cable to the FC device 3Ethernet Cable Specifications To Apply Power4Fibre channel LED Indicator Status Definitions To Connect the Ethernet Cable5Ethernet LED Indicator Status Definitions 3LEDs and Attention Button Testing the Installation To Verify Proper Installation for the Solaris OSTo Verify Attached Storage for the Solaris OS 6Power LED Status Definitions Configuring the HBA for Hot-Plug OperationTo Prepare the HBA for Hot-Plug Removal for the Solaris OS Removing the HardwareTo Remove the HBA Hardware Driver Software for the Solaris OS Solaris Diagnostic SupportTo Install the HBA Software for the Linux OS Installing Software for the Red Hat and Suse Linux OSesTo Install the HBA Software for the VMware Technology Installing Software for Windows Server 2003 OSTo Install the Software for the Windows Server 2003 OS Configuration and Diagnostic UtilitiesKnown Issues

SG-XPCIE2FCGBE-E-Z specifications

Sun Microsystems SG-XPCIE2FCGBE-E-Z is a cutting-edge Fibre Channel Host Bus Adapter (HBA) designed specifically for high-performance computing environments. Essential for organizations that require robust data transfer capabilities and storage connectivity, this HBA provides an efficient solution to meet demanding enterprise data needs.

One of the standout features of the SG-XPCIE2FCGBE-E-Z is its dual-port 8Gb Fibre Channel connection, which enhances data transfer speeds significantly compared to its predecessors. This dual-port capability allows for increased throughput and redundancy, ensuring that critical applications remain operational even in the event of a component failure. With speeds of up to 8 gigabits per second, users can experience rapid data access and retrieval, which is crucial in today’s data-intensive environments.

The architecture of the SG-XPCIE2FCGBE-E-Z is built on PCI Express technology, which facilitates a high bandwidth connection to the server. This is particularly beneficial for applications that demand high data throughput, such as database management, virtualization, and high-performance computing tasks. The PCI Express interface allows this adapter to efficiently handle the high volumes of data typical in enterprise settings.

Moreover, the SG-XPCIE2FCGBE-E-Z supports various advanced features, including support for multipathing and load balancing, which improves data reliability and optimizes the use of available network resources. The adapter is also designed to support a range of operating systems, making it compatible with various infrastructures and easier to integrate into existing systems.

The card's form factor is optimized for energy efficiency, helping businesses reduce their operational costs while maintaining peak performance. As organizations focus increasingly on sustainability, the energy-efficient design of this HBA aligns with broader trends in the technology industry.

In terms of installation, the SG-XPCIE2FCGBE-E-Z is straightforward to integrate into compatible systems. Its compatibility with both Sun and other server platforms ensures that it can be deployed in a variety of IT environments without extensive reconfiguration.

Overall, the Sun Microsystems SG-XPCIE2FCGBE-E-Z Fiber Channel HBA represents a powerful tool for businesses that require fast, reliable, and efficient data handling capabilities. With its dual-port design, high-speed performance, and compatibility with a wide range of systems, this HBA is well-suited for the modern data landscape, helping organizations to streamline operations and enhance productivity.