Sun Microsystems 802-1304-10 manual To use the utility, type the following at the prompt

Page 7

To use the utility, type the following at the prompt:

#/usr/sbin/be_speed beX <arguments>

Wherein X is the SunFastEthernet Adapter card number and the arguments are:

auto (automatic speed selection)

100 (forces 100 Mbps mode)

10 (forces 10 Mbps mode)

If no arguments are selected then the current mode (auto or forced) and speed (10 or 100Mbps) of the interface will be printed.

Speed Selection

5

Image 7
Contents SunFastEthernet Adapter Product Note Trademarks Hardware Requirements SunFastEthernet AdapterSoftware Requirements Net-Install Servers Solaris 2.3 Hardware 5/94 Only Diskless Clients Solaris 2.3 Hardware 5/94 Only Speed Selection To use the utility, type the following at the prompt SunFastEthernet Adapter-July