▼To Install the NEM
1.Attach an antistatic strap (refer to “Observing ESD and Handling Precautions” on page 8).
2.Refer to your system installation or service manual to determine an appropriate slot in which to install the NEM.
3.Unpack the NEM and remove it from the antistatic bag.
4.Locate a vacant NEM slot in the back of the chassis. Ensure the label on top of the NEM is facing up.
5.Align the NEM with the vacant slot.
Ensure that the NEM’s port connectors are facing toward you and that the NEM ejector levers are fully opened.
Ejector Levers
FIGURE 2-1 NEM Ejector Levers
Chapter 2 Hardware Installation and Removal 9