Network Technologies DVI-x Select Country Code, Mice and Trackballs with MACs, Country Codes

Page 14

NTI UNIMUX SERIES USB KVM SWITCH

Select Country Code

It is possible to configure the UNIMUX to emulate a specific international Sun keyboard regardless of what actual keyboard is connected. This is recommended when the CPU needs the layout code (i.e. a SUN CPU) and the keyboard doesn't have an explicit layout code (i.e. some Windows keyboards). To do this, manually set the UNIMUX to indicate the international keyboard identification number to the CPU using the following procedure;

1.Connect the keyboard to be used to the UNIMUX

2.Enter Command Mode

3.Type Lxx, where xx is the number from the list below that corresponds to the desired country code

4.Exit Command Mode

Note: If any SUN CPUs are connected to the UNIMUX, they must be rebooted. Keyboard configuration is only read by SUN CPUs on startup.

Country Codes

00

Auto Detect

13

International (ISO)

26

Swedish

01

Arabic

14

Italian

27

Swiss/French

02

Belgian

15

Japan (Katakana)

28

Swiss/German

03

Canadian-

16

Korean

29

Switzerland

 

Bilingual

 

 

 

 

04

Canadian-French

17

Latin American

30

Taiwan

05

Czech Republic

18

Netherlands/Dutch

31

Turkish

06

Danish

19

Norwegian

32

UK

07

Finnish

20

Persian (Farsi)

33

US

08

French

21

Poland

34

Yugoslavia

09

German

22

Portuguese

 

 

10

Greek

23

Russia

 

 

11

Hebrew

24

Slovakia

 

 

12

Hungary

25

Spanish

 

 

Figure 9- Country Codes for international SUN keyboards

For more on international SUN keyboards, see page 18.

Mice and Trackballs with MACs

The UNIMUX can be configured to enable full functionality between mice and trackballs having two or more buttons and USB MAC CPUs. By default, the ports on the UNIMUX are configured for use with WINDOWS and SUN CPUs and have no special translation for using multi-function mice and trackballs when a MAC CPU is connected. Using the commands <M> + <x> + <x> (xx = port number), or <W> + <x> + <x> in Command Mode (page 9), either enable or disable this feature as needed for each port.

NOTE: Be sure to re-configure port for connection to a WINDOWS or SUN CPU if a MAC CPU is removed and a WINDOWS or SUN CPU is then connected.

11

Image 14
Contents UNIMUX-DVI-x Copyright CE StatementTable of Contents Types of User Input Devices Supported IntroductionAvailable Options Types of CPUs SupportedMaterials DefinitionsFeatures and Functions Rear View of UNIMUX-DVI-8Rackmounting Instructions To Mount to a RackInstallation Rear View of UNIMUX-DVI-8 Connect each CPURS232 Connection Control TerminalPower-Up Sequence LimitationsFront Panel Control Using the Unimux DVI KVM SwitchCommand Mode Keyboard ControlNormal Mode Scan ModeBroadcast Mode No Sun Sleep ModeCountry Codes Select Country CodeMice and Trackballs with MACs RS232 Connections and Configuration RS232 Control9D Male Unit #1 Source Wiring Schematic of Matrix-Y-1 cable9D Male Autostatus Command ProtocolCommand Definitions SerTest- RS232 Interface Test Program Main OptionsSetup Options Ethernet Operations not applicable to this modelTranslation Capabilities Keyboard FeaturesKeyboard-To-Computer Translation Translation TablesInternational Sun Keyboards Keyboard LayoutsProblem No Video Warranty InformationTroubleshooting Index