Sun Microsystems 10GBE XFP manual To Install the Adapter

Page 32

Adapter in slot-2 of a Sun Fire T2000 system. The SATA cables from the adjacent card slot prevent the proper installation of an Sun x8 Express Dual 10 Gigabit Ethernet Fiber XFP Low Profile Adapter in this slot. (Note that this issue does not exist for Sun Fire T2000 that is RoHS compliant.)

Caution – Do not install the Sun x8 Express Dual 10 Gigabit Ethernet Fiber XFP Low Profile Adapter in slot-5 of a Sun Fire X4600 system because the heatsink on the adapter will sit against the daughter card of the Sun Fire X4600 system.

Note – When you install the adaper, ensure that the optical transceiver has not been installed. The optical transceiver must be installed into the adapter when it is in place.

This section contains the following topics:

■“To Install the Adapter” on page 14

■“Installing an Optical Transceiver” on page 17

■“Verifying the Hardware Installation” on page 20

▼To Install the Adapter

1.Halt and power off your system.

2.Power off all of the peripherals connected to your system.

3.Open the system unit.

4.Attach the adhesive copper strip of the antistatic wrist strap to the metal casing of the power supply. Wrap the other end twice around your wrist, with the adhesive side against your skin.

5.Remove the filler panel from the PCI-E opening.

14 Sun Dual 10GbE XFP PCI Express Card User’s Guide • January 2009

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Sun Dual 10GbE XFP PCI Express Card User’s Guide Please Recycle Contents Network Configuration Configuring the nxge Device Driver ParametersConfiguring VLANs Configuring the Jumbo Frames FeatureConfiguring Link Aggregation Index SpecificationsDiagnostic Software Tables Page Figures Sun Dual 10GbE XFP PCI Express Card User’s Guide January Declaration of Conformity EMCXii Sun Dual 10GbE XFP PCI Express Card User’s Guide January Preface How This Document Is OrganizedUsing Unix Commands Shell Prompts Typographic ConventionsThird-Party Web Sites Related DocumentationDocumentation, Support, and Training Sun Welcomes Your Comments Page Product Description Product OverviewComponents Hardware and Software Requirements Features Sun Dual 10GbE XFP PCI Express Card User’s Guide January Installing and Setting Up the Driver To Download the Driver on a Solaris PlatformUncompress the gzipped tar file Unpack the tar fileFor Sparc systems, change to the following directory For x86 systemsSelect the packages you want to install # /usr/sbin/pkgadd -dVerify that the nxge driver is installed on the system To discover the driver packages run the pkginfo commandTo remove the driver packages run the pkgrm command To Remove the Driver from a Solaris Platform# ifconfig -a grep eth Downloading and Installing the Driver on a Linux PlatformLogin to your system # modprobe nxge # rpm -e nxge-1.0-1 To Remove the Driver From a Linux Platform# ethtool -i eth4 driver nxge version Sun Dual 10GbE XFP PCI Express Card User’s Guide January Installing the Adapter Installing the AdapterTo Install the Adapter Installing the Adapter Sun Dual 10GbE XFP PCI Express Card User’s Guide January Installing an Optical Transceiver Install the optical transceiversTo Install an Optical Transceiver Installing the Adapter Verifying the Hardware Installation To Verify the Hardware InstallationConnect the Ethernet cables Ok show-netsOk cd /pci@7c0/pci@0/pci@8/network@0,1 Ok .propertiesOk device-end Rebooting the SystemOk boot -r Network Configuration Configuring the Network Host Files# ifconfig nxge0 plumb ip-addressup # grep nxge /etc/pathtoinst# cat /etc/hosts Export/root/client-name To Set Up a 10-Gigabit Ethernet Port on a Diskless ClientEdit the hosts file in the diskless client’s root directory Network Configuration # grep client-name /etc/bootparams Find the root directory of the client systemProceed with the Solaris Operating System installation Ok boot /pci@7c0/pci@0/pci@8/network@0Shut down and halt the client system # shutdown -i0 -g0 -y# dladm show-dev To Boot Over the Network on Solaris x86 and Linux Systems Refer the boot-device-order imageSystem should reboot after saving the boot configuration Press the F12 key to install the OS from the network Image pxe-mac-addrSun Dual 10GbE XFP PCI Express Card User’s Guide January Configuring the nxge Device Driver Parameters Nxge Hardware and Software OverviewNoninteractive and Interactive Modes Setting nxge Driver Parameters on a Solaris PlatformSetting Parameters Using the ndd Utility To modify a parameter value, use the -setoption To Specify Parameter Values Using the ndd UtilityTo Specify Device Instances for the ndd Utility Man prtconf Setting Parameters Using the nxge.conf File# ndd /dev/nxge1 name to get/set ? To Set Driver Parameters Using an nxge.conf File Following parameters can be set usingLocate the path names and the associated instance numbers Set the parameters for the nxge devicesSun Dual 10GbE XFP PCI Express Card User’s Guide January Configuring the nxge Device Driver Parameters Class-opt-ipv4-tcp = 100 class-opt-ipv4-udp = Tuning for Maximum Performance on a Solaris Platform Reboot the system# reboot -r Save the nxge.conf fileSet ddimsixalloclimit=1 To Improve Performance on an AMD CPU Based Sun PlatformSet ipipsqueuefanout=1 set ipsqueuesoftring=1 Configuring the nxge Device Driver Parameters Setting Parameters on a Linux Platform To Set Parameters Using the ethtool UtilityConfiguring the nxge Device Driver Parameters Following are some common parameters that can be changed # ethtool -C eth4 rx-usecs # ethtool -c eth4 # ethtool -k eth4# /usr/local/bin/nxgeconfig eth4 get # /usr/local/bin/nxgeconfig eth4 get classoptipv4udpTuning for Maximum Performance on a Linux Platform # /usr/local/bin/nxgeconfig eth4 set classoptipv4tcp 0xfe0Net.ipv4.tcpsack = Net.core.netdevmaxbacklog =Set up the sysctl utility # sysctl -p /etc/sysctlnxge.confJumbo Frames Overview Configuring the Jumbo Frames FeatureChecking Jumbo Frames Configurations To Show the Driver Statistics in a Solaris Environment # kstat nxge1 grep rdcpacketsEnabling Jumbo Frames in a Solaris Environment # kstat Nxge38001To Check Layer 2 Configuration Boot -r# ifconfig nxge mtu Set the maximum MTU for maximum performanceTo Check Layer 3 Configuration To Enable Jumbo Frames in a Linux EnvironmentEnsure that the nxge software is installed Enabling Jumbo Frames in a Linux Environment# ifconfig ethx mtu # ifconfig eth4To Show the Driver Statistics in a Linux Environment Set the MTU for maximum performanceConfiguring the Jumbo Frames Feature Sun Dual 10GbE XFP PCI Express Card User’s Guide January Overview of Link Aggregation Configuring Link AggregationConfiguring Link Aggregation in a Solaris Environment To Configure Link Aggregation in a Solaris Environment Use the dladm show-aggr-scommand to display statistics # ifconfig aggr33 plumb# ifconfig aggr33 192.168.1.1/24 broadcast + up # dladm show-aggr -sConfiguring Link Aggregation in a Linux Environment To Configure Bonding for Multiple nxge InterfacesLoad the bonding driver # dladm show-aggr -LConfigure bond0 interface Sun Dual 10GbE XFP PCI Express Card User’s Guide January Configuring VLANs Overview of VLANsVlan Configuring VLANs in a Solaris Environment To Configure Static VLANs 2Ethernet Tag Header FormatConfiguring VLANs in a Linux Environment To Configure VLANs in a Linux Environment# ifconfig -a Ensure that the nxge module is loadedConfigure the nxge Vlan eth2 in this example # /sbin/vconfig add eth2# ifconfig eth2.5 xxx.xxx.xx.xxx up Insert the Vlan moduleSpecifications ConnectorsPerformance Specifications Table A-1XFP Connector CharacteristicsPhysical Characteristics Power RequirementsSun Dual 10GbE XFP PCI Express Card User’s Guide January Diagnostic Software SunVTS Diagnostic SoftwareTo Update SunVTS to Recognize the Adapter Updating SunVTS to Recognize the AdapterUsing the SunVTS netlbtest To Use the netlbtestSun Dual 10GbE XFP PCI Express Card User’s Guide January Symbols IndexSun Dual 10GbE XFP PCI Express Card User’s Guide January
Top Page Image Contents