Network Technologies FES-1800 user manual Technical Specifications, Physical Specifications

Page 20

	Specifications
Specifications
Technical Specifications:
FES-1800:	Eight10/100BASE-T/TX auto-negotiating ports with RJ-
	45 connectors.
Chip Set:	Kendin, KS 8998
LED Reports:	Per Unit - Power Status Per Port - Link/Active, Full
	Duplex/Collision (2LEDs)
Ethernet Standards:	IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX
Cable:	10BASE-T, 2 pair UTP Cat.3,4,5. Up to 100m (328ft)
	100BASE-TX 2 pair UTP Cat. 5. Up to 100m (328ft)
Switching Methods:	Store-and-forward.
Forwarding Rate:	14,880 pps for 10Mbps, 148,800 pps for 100Mbps

Physical Specifications:

AC Input:	90-132VAC or 180-264VAC, 50-60Hz external universal
	power supply.
Input Fuse:	2A
Output Voltage:	5VDC
Power Consumption:	10W max
Operating Temperature:	0˚C - 40˚C (32˚F - 104˚F)
Storage Temperature:	-25˚C - 70˚C (-13˚F - 158˚F)
Humidity:	10% to 90% non-condensing
Emission Comliance:	FCC part 15 class A, CE mark
Net Weight :	516 g
	1.14s lbs

15

Image 20

Contents Fast Ethernet Switch User’s Manual Copyright Quick installation Contents Introduction General Features of a Switch Introduction General Features of a Switch General features of FES-1800 SwitchFES-1800 Front panelRear panel Network Terminology What is a Switch?Quick Overview of Networking Terminology Quick Overview of Networking Terminology What Is Fast Ethernet? Historical BackgroundEthernet and Fast Ethernet Standards Cables RequiredUplinking How to Configure a Fast Ethernet Network?Cable Length Different Network Topologies Other Ways to Expand Your NetworkGateway Physical installation Installing a SwitchBefore the Installation Connecting Hubs or Other Switches Connecting end nodes with a cableConnecting a cable to the switch Cable ConnectionsChecking Port Status LED Indicators Power indicatorLink/ ACT indicator DPX / COL indicatorTroubleshooting Network Management Physical Specifications SpecificationsTechnical Specifications 180-00318-000