Network Technologies RACKMUX-V15-4UNV Display Functions, Standard Controls, OSD Control Menu

Page 25

NTI RACKMUX KVM Drawer with NODEMUX Switch

DISPLAY FUNCTIONS

An NTI RACKMUX with a 17” monitor supports resolutions up to SXGA (1280 x 1024) with a refresh rate at between 55 and 76Hz. When a 15” monitor is present, support for resolutions up to XGA (1024 x 768) apply with a refresh rate at between 55 and 76Hz. The quality of the image on the LCD monitor is adjustable using an On Screen Display (OSD) menu using the control buttons on the RACKMUX.

Standard Controls

The RACKMUX has 5 standard control buttons and a power LED. The 5 standard control buttons operate as follows:

•The Power button turns the RACKMUX LCD and backlight ON and OFF as desired.

•The Power LED located immediately below the Power button is a dual color

LED. It will illuminate with a green color when the RACKMUX is powered

Power

ON and working properly. It will illuminate with a red color if the RACKMUX

ON/OFF

is powered ON but there is no input signal detected.

Power LED

•The Menu button is used to bring up the OSD menu where the various settings of the LCD display can be adjusted. Once the OSD screen is displayed, the Menu button is used to make selections within the menus. See "OSD Control Menu" (below) for more on LCD display settings.

•The Up and Down Arrow buttons are used to navigate through the menus. Move the cursor up or down as desired to highlight an item for selection. Once an item is highlighted, pressing the Menu button will select it.

Menu

Up Arrow

Down Arrow

Select/

Auto Adjust

Controls for the OSD Menus

Figure 18- OSD Controls

•The Select button is used to make selections within the OSD menus when the OSD menu is ON. When the OSD menu is OFF, the Select button will act as an Auto Adjust button to keep the user from having to use the menus to adjust the quality of the image on the monitor.

OSD Control Menu

The OSD (On Screen Display) Menu enables the user to select the desired characteristics of the LCD display. To activate the OSD Menu, press the Menu button (above). To turn the Menu back OFF, either select "EXIT" from the main menu or just wait 10-60 seconds and it will automatically be cleared from the screen.

OSD Main Menu

Selection

Purpose

Brightness/Contrast

Increase/decrease panel brightness/contrast level

Color

R,G,B color temperature control

Position

• Video Image horizontal and vertical position control

 

•

Clock setting

 

•

Phase control

Setup

• Control OSD Image position on screen

 

• Set time OSD will stay on screen before auto shutoff

 

• Select the language of the OSD menu

Exit

Exit from the OSD control menu

Range 1-1001-1001-100

--

10 to 60 seconds

Several languages (see page 8)

21

Page 24 Page 26
Image 25
Page 24 Page 26
Contents RACKMUX-V15-4UNV Trademark Table of Contents Index Warranty Information Troubleshooting Default Password ResetModels Available FeaturesTypes of CPUs Supported OptionMaterials Set of 2 cables for each CPU being connected to the switch17 18 19 20 21 Rear View Rack Mounting Instructions InstallationConnect The Cables 13W3M-15HDF Pin miniDINIEC Power Cord Power-Up SequenceIEC Connectxor Enabling the Security Feature Using the RackmuxKeyboard Control OSD ControlAdministration Mode User Login ModeAdditional Modes Available With Security Exit Administration Mode Return to previous mode Esc Switch ConfigurationUser Name List Administrator PasswordKeystroke Ctrl + a Ctrl + E Ctrl + P Esc System Access List User Access FunctionsCommand Mode Keystroke Enter EscType to a CPU To exit Command Mode, either hold down any Scan Mode Broadcast ModeNormal Mode Edit ModeEdit Mode Contd Function Search ModeEsc Enter Activate security features Maintenance ModeFunctionKeystroke Help Mode RS232 Connections and ConfigurationRS232 Connector DB-9 Female RS232 ControlBaud Rate ConfigurationLoop Back Wiring Schematic of Matrix-Y-1 cable Command ProtocolExit Switch Configuration Mode Unit AddressResponse Format RS AacrFormat CS AA,XX,YYCR Format CA AA,XXCRFormat Standard Controls Display FunctionsOSD Control Menu OSD Main MenuColor Menu Brightness/Contrast MenuPosition Menu OSD Image can be moved to different points on the display Setup MenuKeyboard Functions Function Key to enable additional key functionsRACKMUX-V15-x Function Key OperationKeys of the Number Pad Number PadAdditional multi-function keys Other Functions of the Fn KeyS. English keyboard with numeric keypad Numeric Keypad OptionKeyboard-To-Computer Translation Keyboard FeaturesTranslation Capabilities Translation TablesDefault Password Reset TroubleshootingGeneral Specs RACKMUX-KVM Drawer Standard SpecificationsLCD Display Controller VGA -15Keyboard Warranty InformationTouchpad Index

RACKMUX-V17-4UNV, RACKMUX-V17-8UNV, RACKMUX-V15-8UNV, RACKMUX-V15-4UNV specifications

Network technologies have seen significant advancements to meet the increasing demand for efficient data management and distribution. Among the prominent solutions in this arena are the RACKMUX-V15-4UNV, RACKMUX-V15-8UNV, RACKMUX-V17-8UNV, and RACKMUX-V17-4UNV. These devices play a critical role in modern networking by providing robust matrix switching capabilities that can accommodate various needs across different environments.

The RACKMUX-V15-4UNV is designed for compact networking setups. This unit features four universal inputs, allowing for seamless integration with multiple devices. Its compact 1U design makes it particularly suitable for environments where space is at a premium, such as data centers and server rooms. The technology supports high-bandwidth data throughput, ensuring fast and efficient data transfers. Moreover, it offers easy monitoring and control through an intuitive user interface, simplifying management for network operators.

Moving to the RACKMUX-V15-8UNV, this model expands upon its predecessor by supporting up to eight universal inputs. It's ideal for larger networking scenarios, providing greater flexibility and scalability. The device comes equipped with advanced signal processing capabilities, enabling it to handle diverse formats without compromising on performance. It also features hot-swappable architecture, ensuring that operators can replace or upgrade components without affecting system uptime.

The RACKMUX-V17-4UNV introduces enhanced functionality with its four universal inputs, incorporating cutting-edge technology for an even more efficient switching process. The key distinguishing feature of the V17 line is its improved power management system, allowing for reduced energy consumption without sacrificing performance. This model is aimed at eco-conscious organizations seeking to lower their carbon footprint while still maintaining high-quality network performance.

Lastly, the RACKMUX-V17-8UNV raises the bar further by providing eight universal inputs alongside advanced features that optimize operational capabilities. This model utilizes the latest in networking protocols, ensuring compatibility with various emerging technologies. Its robust build quality also ensures reliability, reducing maintenance needs and increasing longevity.

Each of these devices reflects the growing need for adaptable and efficient network technologies. Their main features, including universal input support, enhanced signal processing, compact designs, and energy management, make the RACKMUX ranges an excellent choice for organizations looking to optimize their network infrastructure. With ongoing advancements, these models will continue to adapt to the evolving landscape of network technology, offering robust, reliable solutions for years to come.
Top Page Image Contents