Network Technologies MAN027 Technical Specifications, Troubleshooting, USB Type B USB Type a

TECHNICAL SPECIFICATIONS

USB Type B		USB Type A
Pin #	Signal		Pin #	Signal
1	+VCC		1	+VCC
2	- DATA		2	- DATA
3	+DATA		3	+DATA
4	GND		4	GND

VGA Video

Pin #	Signal	Pin #	Signal
1	RED	9	NC
2	GREEN	10	GND
3	BLUE	11	ID0
4	ID2	12	ID1
5	TST	13	HS
6	RED GND	14	VS
7	GREEN GND	15	ID3
8	BLUE GND

Mating face of a USB Type B Female Mating face of a USB Type A Female	Mating face of a 15HD female
	VGA VIDEO

2	1			5	4	3	2		1
					10	9	8	7	6
	1	2	3	4
					14	13	12		11
				15
3	4
		Barrel
		Power Connector
		5VDC @ 2.0A OUTPUT
	(Outside			(Inside
	barrel)			barrel)

2.1 mm x 5.5 mm Female

TROUBLESHOOTING

1.Verify all cables are securely connected and that the installation procedure was carefully followed.

2.If a CPU seems to be locked up,

•cycle the power to the KEEUMUX-USBV-2U USB KVM switch OFF, then ON.

•unplug the "USB DEVICES" keyboard and mouse cables (not the "CPU x" keyboard and mouse) from the UNIMUX- USBV-2 USB KVM switch and reconnect them.

•reset default values as described on page 6.

•reboot the CPU

If the NTI UNIMUX-USBV-2 USB KVM switch still seems work improperly, help may be found in the Frequently Ask Questions (FAQ’s) section of our website at http://www.nti1.com or call us directly at (800) 742-8324(800-RGB-TECH)or (330) 562-7070and we will be happy to assist in any way we can.

11