Command Mode
Function:
Increment Port
Decrement Port
Keystroke:
I | or | (select the next higher port | |
ex. 01 | 02) | ||
D | or | (select the next lower port | |
ex. 02 | 01) | ||
or
+
-
KEY SYMBOLS LEGEND:
PRESS EITHER KEY
CHORDED SEQUENCE- PRESS CONSECUTIVELY AND KEEP KEYS PRESSED UNTIL ALL ARE PRESSED.
PRESS CONSECUTIVELY
Toggle Scan Mode ON and OFF
S | (When toggled to ON, Scan Mode will be indicated the LED for only the active CPU | |
flashing ON and OFF .) | ||
|
Sets scan | T | - | - | - | (xxx from 002 to 255. ie. t002 | ||||
would set the | |||||||||
period for each port. | x | x | x | ||||||
for 2 seconds) |
Toggle Broadcast Mode ON and OFF
B | (When toggled to ON, Broadcast Mode will be indicated by both LEDs cycling alternately |
ON and OFF in rapid intervals.) |
Selects a specific port
Select a different control key combination
Select a specific country code for the keyboard
P - 0 -
C - x
L - x -
(P0x would be P01 or P02.) | ||
x | ||
|
x = the desired key (This will replace the Ctrl + ` sequence to enter Command Mode)
x | (Lxx would be |
Print the code version to a text editor
V | (This will print the version of the code in the |
window for use when troubleshooting the switch) |
Configure port to connect To a MAC CPU
Configure port to connect To a WINDOWS or SUN CPU
Exit Command Mode
M | + | x | (x= 1 or 2 <M> + <1> will enable function on Port 1 | ||
<M> + <2> will enable function on Port 2. Keyboard | |||||
| LED's will flash once to confirm command. ) | ||||
W | + | x | (x= 1 or 2 <W> + <1> will disable function on Port 1 | ||
<W> + <2> will disable function on Port 2. Keyboard | |||||
| LED's will flash once to confirm command. ) | ||||
|
|
|
|
| |
Esc |
|
| Note: The user must exit Command |
| |
|
| Mode to use the CPU(s) in the |
| ||
|
|
| selected mode. |
| |
|
|
|
|
|
|
Default Value Reset
Default
1.Disconnect power from the
2.Press and hold the CPU SELECT button on the switch
3.
4.Release the CPU SELECT button
6