P10 Netra 240 Server Architecture | Sun Microsystems, Inc. |
with main memory, improving sequential PCI DMA performance. This approach minimizes
Each of the two JIO Hostbridge ASICs provides two
•Ultra160 SCSI controller (for internal disk drives) and external Ultra160 SCSI port (for arrays)
•Optional Sun Crypto Accelerator 500 module
•Two
•South Bridge general I/O ASIC
•One
•Two
South Bridge ASIC
The South Bridge ASIC, connecting to one of the JIO Hostbridge ASICs via one of its PCI interfaces, provides serial and general I/O functionality which includes:
•An internal ATA (EIDE) connector to support the optional internal
•A standard
•Two USB v1.1 interfaces
The South Bridge ASIC also connects the System Management Controller ASIC that serves as a service processor for the system’s ALOM remote management capabilities. ALOM remote system management can be accessed via either the
Internal Mass Storage
The Netra 240 server provides internal support for 160 MB/sec. Ultra160 SCSI devices. The internal disk drives are
Networking and I/O Expansion
The Netra 240 server provides a full complement of networking and I/O expansion options through connectors on the back panel.
Ethernet Ports
The Netra 240 server provides four standard 10/100/1000 Mbps (Gigabit) Ethernet connectors to support increas- ing demands for both high bandwidth and multiple network connectivity. Gigabit Ethernet technology from Sun is backwards compatible with 10 Mbps and 100 Mbps Ethernet, with the interface