Sun Microsystems X6275 manual Prerequisites, Things You Must Decide, What to Do Next

Page 10

Prerequisites

Complete the following tasks before you begin the installation.

Install the server hardware.

(Optional) Configure the service processor.

Gather needed information, such as IP address and netmask.

Things You Must Decide

Where will you install the OS? You can install an OS using the flash module, which is similar to a hard drive. See the Sun Blade X6275 Server Module Service Manual for instructions to access the flash module.

Note – The Sun Blade X6275 server module supports industry-standard RKVM with devices connected to it through a USB port or the service processor. For information about setting up USB connections to your system, see “Using a Remote Control Application (RKVM)” on page 3.

Do you need to update the operating system and drivers?

For information on updating your software, see Chapter 3, “Post Installation” on page 17.

For a full list of supported operating systems, see

http://www.sun.com/servers/blades/x6275/

What to Do Next

The chapters in this guide provide detailed installation information.

You should also gather the installation, administration, and configuration documentation distributed with the operating system. These documents generally accompany the distribution media as printed manuals or are included as PDF files on the medium itself. In many cases, the latest versions of such documents are also downloadable from the web site of the OS vendor.

2 Sun Blade X6270 Server Module Windows Operating System Installation Guide • September 2009

Image 10
Contents Sun Microsystems, Inc Page Contents Incorporate Sun Blade Server Drivers Into WIM Post InstallationIndex Product Updates Related DocumentationHtml Documentation, Support, and Training Sun Welcomes Your CommentsPage Overview Things You Must Decide PrerequisitesWhat to Do Next To Mount a DVD or Equivalent ISO Image Using a Remote Control Application RkvmSelect the DVD drive or the ISO file To Connect the Dongle for a Local Installation Dongle Cable ConnectionsFigure Legend Page Installing Windows Server Operating System Task Map for the Windows Server 2008 Installation 1Task Map for the Windows 2008 InstallationTo Install Windows Server 2008 Using Local or Remote Media Installing Windows Server 2008 Using Local or Remote MediaReset or power on the server. For example Boot Device dialog appears Installation Type dialog, click Custom advanced Where do you want to Install Windows dialog appears Proceed to Post Installation on Installing Windows Server 2008 Using a PXE Network Before You BeginTo Install Windows Server 2008 Using PXE Reset or power on the server, for exampleBoot Agent dialog appears Post Installation Downloading Server-Specific Drivers To Download the Server-Specific DriversInstalling Server-Specific Device Drivers To Install the Server-Specific Device Drivers Post Installation Perform one of the following Installing Supplemental SoftwareInstall the Supplemental Software Do one of the followingPost Installation Page Adding Drivers to a WIM Image Incorporate Sun Blade Server Drivers Into WIMBefore you Begin To Add Drivers to the WIM Image PathAndCredentialsAppendix a Incorporate Sun Blade Server Drivers Into WIM Page Index