Sun Microsystems X6275 manual Boot Device dialog appears

Page 18

■From the ILOM web interface, select Reset on the Remote Power Control tab.

■From the local server, press the Power button on the front panel of the server to power off the server, then press the Power button again to power-on server.

■From the ILOM CLI on the server SP, type: reset /SYS

■From the ILOM CLI on a CMM, type: reset /CH/BLn/SYS

Where n is the number of server module in chassis.

The BIOS screen appears.

3.When the Press F8 for BBS POPUP message appears on the BIOS POST screen, press F8 to select a boot device.

The Boot Device dialog appears.

Note – The dialog that appears in your installation may be different depending the type of disk controller installed in your server.

4.In the Boot Device dialog, select the menu item according to the Windows media installation method you elected to use and press Enter.

For example:

■If you elected to use the Windows Local delivery method, select CD/DVDW.

■If you elected to use the Sun ILOM Remote Console delivery method, select

Virtual CDROM.

5.When prompted with Press any key to boot from CD, press any key. The Windows installation wizard starts.

Continue the Windows installation wizard until the Installation Type dialog appears.

10 Sun Blade X6270 Server Module Windows Operating System Installation Guide • September 2009

Image 18

Contents Sun Microsystems, Inc Page Contents Post Installation Incorporate Sun Blade Server Drivers Into WIMIndex Product Updates Related DocumentationHtml Documentation, Support, and Training Sun Welcomes Your CommentsPage Overview Prerequisites Things You Must DecideWhat to Do Next Using a Remote Control Application Rkvm To Mount a DVD or Equivalent ISO ImageSelect the DVD drive or the ISO file To Connect the Dongle for a Local Installation Dongle Cable ConnectionsFigure Legend Page Installing Windows Server Operating System Task Map for the Windows Server 2008 Installation 1Task Map for the Windows 2008 InstallationInstalling Windows Server 2008 Using Local or Remote Media To Install Windows Server 2008 Using Local or Remote MediaReset or power on the server. For example Boot Device dialog appears Installation Type dialog, click Custom advanced Where do you want to Install Windows dialog appears Proceed to Post Installation on Installing Windows Server 2008 Using a PXE Network Before You BeginTo Install Windows Server 2008 Using PXE Reset or power on the server, for exampleBoot Agent dialog appears Post Installation Downloading Server-Specific Drivers To Download the Server-Specific DriversInstalling Server-Specific Device Drivers To Install the Server-Specific Device Drivers Post Installation Perform one of the following Installing Supplemental SoftwareInstall the Supplemental Software Do one of the followingPost Installation Page Incorporate Sun Blade Server Drivers Into WIM Adding Drivers to a WIM ImageBefore you Begin To Add Drivers to the WIM Image PathAndCredentialsAppendix a Incorporate Sun Blade Server Drivers Into WIM Page Index