Verification Checklist
Did the NAM's OK LED light? If not, see Troubleshooting.
Troubleshooting
Symptom | Possible Cause | Solutions |
|
|
|
No power. | The power cord is not | Check that the power cord |
| securely plugged into the | is securely attached at both |
| wall receptacle, or is not | ends. |
| connected to the power |
|
| inlet at the rear of the |
|
| housing. |
|
|
|
|
| The wall receptacle has no | Check the wall receptacle |
| power. | power by plugging in some |
|
| equipment that is known to |
|
| be working. |
|
| Check the circuit breaker. |
|
|
|
| Power supply is not fully | Reinstall the power supply, |
| inserted into the housing. | making sure that you gently |
|
| push it all the way into the |
|
| housing. |
|
|
|
| Power supply is defective. | Replace power supply. |
|
|
|
If you are still having problems with the power supply, contact your service representative.
Power Failure Recovery
In cases of loss and restoration of nominal voltage conditions, this product automatically restores to service without manual intervention.
N
*9000±A2±GN1A±10*
Copyright E 1998 Paradyne Corporation
4