METRObility Optical Systems R231-55 Technical Specifications, Data Rate, Network Connections

Page 20

Technical Specifications

Data Rate

Data Rate ____________________ 100Mbps half duplex, 200Mbps full duplex

Bit Delay ____________________________________ 66 bits (fiber to copper)

____________________________________ 51 bits (copper to fiber)

Network Connections

Singlemode F/O Interface (R231-14, R231-16)

Connector ________________________________________________ ST or SC

Wavelength _______________________________________________ 1310 nm

RX Input Sensitivity ________________________________ -29 dBm minimum

Output Power ____________________________________ -15 dBm to -8 dBm

Supported Link Length __________________________ up to 20 km full duplex

Cable Type ___________________________________________ 9/125 m F/O

Singlemode F/O Interface — long haul distance support (R231-17)

Connector _____________________________________________________ SC

Wavelength _______________________________________________ 1310 nm

RX Input Sensitivity ________________________________ -34 dBm minimum

Output Power ______________________________________ -5 dBm to 0 dBm

Supported Link Length __________________________ up to 40 km full duplex

Cable Type _______________________________________ 9/125 m SM F/O

Singlemode F/O Interface — extended long haul distance support (R231-1J) Connector _____________________________________________________ SC

Wavelength _______________________________________________ 1550 nm

RX Input Sensitivity ________________________________ -34 dBm minimum

Output Power ______________________________________ -5 dBm to 0 dBm

Supported Link Length _________________________ up to 100 km full duplex

Cable Type _______________________________________ 9/125 m SM F/O

Singlemode BWDM F/O Interface (R231-1X, R231-1Y)

Connector _____________________________________________________ SC

Supported Link Length __________________________ up to 20 km full duplex

Cable Type ___________________________________________ 9/125 m F/O

RX Input Sensitivity ________________________________ -32 dBm minimum

Output Power ___________________________ -15 dBm to -8 dBm (9/125 m)

(R231-1X)

TX Wavelength ________________________________________ 1550 nm

RX Wavelength ________________________________________ 1310 nm

(R231-1Y)

TX Wavelength ________________________________________ 1310 nm

RX Wavelength ________________________________________ 1550 nm

20 User Guide

Image 20
Contents Installation & User Guide Radiance Access Line Cards 100Mbps Copper to FiberOverview Overview Radiance Access Line Cards 1Unpack the Line Cards 2Set the SwitchesMDI-IIto MDI-XSwitch twisted-pair ports only DIP Switches Switch Position Function LabelLink Loss Carry Forward Far End Fault 3Install the Line CardFiber Optic Interface 4Connect to the NetworkTwisted-Pair Interface Network Connections Bwdm InterfaceCwdm Interface LED Indicators Factory SettingsDefault Hardware Switch Settings Label Name Color Status IndicationDefault Software Settings Software SettingsBandwidth Allocation Maximum Burst SizeWrite Protect Loopback ModePort Enable/Disable Remote Management Statistics Rmon StatisticsEthernet Statistics Statistic Name DescriptionOutput Power Level Singlemode Fiber Optic Power MonitorsInput Power Level Link Loss Carry Forward Llcf Link Loss Return LLR Topology Solutions Network Connections Technical SpecificationsData Rate Power EnvironmentalProduct Safety, EMC and Compliance Statements CSAWarranty and Servicing Three-Year Warranty for the Radiance Access Line CardProduct Manuals