Paradyne SAM2000GV-12, SAM2000QV-12, SAM2000V-12 Installation, Unpack and Inspect the SAM2000GV

Page 2

2.0INSTALLATION

CAUTION Net to Net Technologies strongly recommends the use of proper electrostatic discharge (ESD) precautions when handling this equipment.

2.1Unpack and Inspect the SAM2000GV

If there is visible damage, do not attempt to connect the device; contact Customer Support at 1-877- 638-2638 (1-603-427-0600 for international customers) or support@nettonet.com.

2.2Install the SAM2000GV in an IP DSLAM Chassis

NOTE There must be a Multiplexer Uplink Module (MUM) installed in your IP DSLAM chassis in order for interface modules to operate.

Net to Net Technologies' IP DSLAM interface modules are hot swappable; installing or removing an interface module while the chassis is powered up does not affect the operational status of other interface modules within the chassis. The IPD12000 is a fourteen slot chassis; slots 1-12 are for interface modules such as the SAM2000GV, slots 13 and 14 are reserved for MUMs. Interface modules may be placed in any order in slots 1-12. The IPD4000 is a five slot chassis; slots 1-4 are for interface modules, slot 5 is reserved for a MUM.

zAlign the SAM2000GV with the module guides in the slot chosen for installation (slot 1-12 on the IPD12000 or slot 1-4 on the IPD4000).

zSlide the SAM2000GV firmly into the chassis. DO NOT USE EXCESS FORCE.

zSecure the SAM2000GV by tightening the fastening screws on the module faceplate.

zVerify that the PWR (Power) LED on the SAM2000GV faceplate is illuminated.

2.3Connect the Voice and SHDSL Lines

2.3.1VoSHDSL RJ21 Pinout

Plug the VoSHDSL cable into the RJ21 port, of the chosen slot, on the back of your IP DSLAM. The RJ21 connector has 50 pins: pins 1-12 and 26-37 provide the SAM2000GV's SHDSL connections to the MUM in your IP DSLAM, pins 14-25 and 39-50 provide the SAM2000GV's Foreign Exchange Office (FXO) connections to voice switches or Private Branch Exchanges (PBXs).

210-0000045 rev04

Page 1 Page 3
Image 2
Page 1 Page 3
Contents SAM2000V-12 SAM2000GV-12SAM2000QV-12 Unpack and Inspect the SAM2000GV InstallationInstall the SAM2000GV in an IP Dslam Chassis Connect the Voice and Shdsl LinesSAM2000GV Default Configurations IP Dslam ManagementParameter Default Configuration SAM2000GV Port ParametersVia Net to Nets Network Management System NMS Via Command Line Interface CLISAM2000GV Management Via Simple Network Management Protocol Snmp Data Storage Bandwidth and DistanceAdditional Information Data Needed for Backup Example LED IndicationsCountry Codes Regulatory Compliance for Class a EquipmentThis Class a product complies with European Norm EN55022

SAM2000GV-12, SAM2000V-12, SAM2000QV-12 specifications

The Paradyne SAM2000 series comprises advanced platforms designed for high-performance telecommunications and networking solutions. The SAM2000V-12, SAM2000GV-12, and SAM2000QV-12 are distinguished by their robust features and cutting-edge technologies, catering to a variety of communication needs.

The SAM2000V-12 is primarily tailored for voice communications, equipped with a sophisticated processing architecture that supports multiple voice channels simultaneously. This model is renowned for its reliability in handling traditional telephony as well as VoIP services, making it an ideal choice for service providers seeking to enhance their voice offerings. Its advanced signaling capabilities and echo cancellation features ensure high-quality voice transmission, even in demanding environments.

On the other hand, the SAM2000GV-12 is designed for both voice and data transmission, integrating advanced functionalities that facilitate seamless communication across various platforms. This model leverages adaptive bandwidth allocation, allowing it to optimize the use of network resources based on demand. The SAM2000GV-12's flexible configuration options enable users to customize their setup, making it a versatile addition to any network infrastructure.

The SAM2000QV-12 excels in providing high-speed data transmission, targeted predominantly at broadband services. Featuring state-of-the-art modulation techniques, this model is capable of delivering impressive throughput even in challenging conditions. Its support for multiple protocols ensures compatibility with existing network infrastructures, making it a future-proof solution for service providers.

All three models of the SAM2000 series are built with reliability and scalability in mind. They incorporate technologies such as advanced error correction and automated network management, which enhance overall performance and reduce maintenance efforts. Additionally, their modular architecture allows for easy upgrades and expansions, accommodating the ever-growing demands of modern networks.

Security is paramount in the SAM2000 series, with built-in encryption protocols safeguarding sensitive data during transmission. This focus on security, coupled with comprehensive monitoring tools, allows network administrators to maintain oversight and manage configurations efficiently.

In summary, the Paradyne SAM2000V-12, SAM2000GV-12, and SAM2000QV-12 represent the pinnacle of telecommunications technology, each model catering to specific communication needs while maintaining high standards of performance, flexibility, and security. These systems are designed to support the rapid evolution of network demands, making them essential components for any modern telecommunications environment.
Top Page Image Contents