SAM2000GV Management | Paradyne SAM2000GV-12, SAM2000QV-12 manual

4.0SAM2000GV MANAGEMENT

Once your SAM2000GV has been installed, bandwidth and other configurations are software selectable via your IP DSLAM's MUM. Dependent upon the MUM model installed, the SAM2000GV may be configured via Command Line Interface (CLI), Simple Network Management Protocol (SNMP) and/or Net to Net Technologies' web-based Network Management System (NMS).

If your IP DSLAM is newly installed, configuration of the DSLAM's IP Address, Subnet Mask and Gateway must be completed, via CLI or NMS, before you will be able to access management data or configure any other parameters. Refer to the CLI Management User Guide (http://www.nettonet.com/support/docs/210- 0000052) or to the NMS Management User Guide (http://www.nettonet.com/support/docs/210-

0000048) for initial configuration instructions.

NOTE If you have an IPD12000 with two MUMs, configuration alterations can be made to a SAM2000GV through either MUM; most configuration(s) will be saved to the NVRAM of both. Refer to your MUM Installation Instructions for specifics.

4.1Via Command Line Interface (CLI)

4.1.1Establish a Connection With Your IP DSLAM

Establish a connection between your IP DSLAM and your PC, either directly (through the COM port on the MUM faceplate) or, if your DSLAM has been configured to allow inband management, across your local network.

4.1.2Launch Your Terminal Emulator

Launch a terminal emulator program on your PC. Net to Net Technologies' copyright information will appear on your screen, followed by a request for username.

4.1.3Log In

Log in with your assigned username and password. For SAM2000GV configuration, you must log in as a superuser (general users have read only access). If your username and/or password are unknown, contact your System Administrator or Information Technology Manager for assistance.

Once you have logged in as a superuser, you will be able to make configuration changes to the SAM2000GV, and any other interface modules installed in your IP DSLAM, as desired. For more detailed information regarding SAM2000GV configuration via CLI, refer to Net to Net's CLI Management User Guide: http://www.nettonet.com/support/docs/210-0000052.

4.2Via Net to Net's Network Management System (NMS)

4.2.1Establish a Connection With Your IP DSLAM

Establish a connection between your IP DSLAM and your PC, either directly (through the 10/100 Ethernet MGMT port on the MUM faceplate) or, if your DSLAM has been configured to allow inband management, across your local network. For direct connections, verify that the MGMT LNK LED on the MUM faceplate is illuminated.

210-0000045 rev04

SAM2000GV-12, SAM2000V-12, SAM2000QV-12 specifications

The Paradyne SAM2000 series comprises advanced platforms designed for high-performance telecommunications and networking solutions. The SAM2000V-12, SAM2000GV-12, and SAM2000QV-12 are distinguished by their robust features and cutting-edge technologies, catering to a variety of communication needs.

The SAM2000V-12 is primarily tailored for voice communications, equipped with a sophisticated processing architecture that supports multiple voice channels simultaneously. This model is renowned for its reliability in handling traditional telephony as well as VoIP services, making it an ideal choice for service providers seeking to enhance their voice offerings. Its advanced signaling capabilities and echo cancellation features ensure high-quality voice transmission, even in demanding environments.

On the other hand, the SAM2000GV-12 is designed for both voice and data transmission, integrating advanced functionalities that facilitate seamless communication across various platforms. This model leverages adaptive bandwidth allocation, allowing it to optimize the use of network resources based on demand. The SAM2000GV-12's flexible configuration options enable users to customize their setup, making it a versatile addition to any network infrastructure.

The SAM2000QV-12 excels in providing high-speed data transmission, targeted predominantly at broadband services. Featuring state-of-the-art modulation techniques, this model is capable of delivering impressive throughput even in challenging conditions. Its support for multiple protocols ensures compatibility with existing network infrastructures, making it a future-proof solution for service providers.

All three models of the SAM2000 series are built with reliability and scalability in mind. They incorporate technologies such as advanced error correction and automated network management, which enhance overall performance and reduce maintenance efforts. Additionally, their modular architecture allows for easy upgrades and expansions, accommodating the ever-growing demands of modern networks.

Security is paramount in the SAM2000 series, with built-in encryption protocols safeguarding sensitive data during transmission. This focus on security, coupled with comprehensive monitoring tools, allows network administrators to maintain oversight and manage configurations efficiently.

In summary, the Paradyne SAM2000V-12, SAM2000GV-12, and SAM2000QV-12 represent the pinnacle of telecommunications technology, each model catering to specific communication needs while maintaining high standards of performance, flexibility, and security. These systems are designed to support the rapid evolution of network demands, making them essential components for any modern telecommunications environment.