Product Documentation Online

Complete documentation for Paradyne products is available at

www.paradyne.com. Select Support → Technical Manuals.

To order a paper copy of a Paradyne document, or to speak with a sales representative, please call 1-727-530-2000.

Unpacking and Inspecting the Equipment

HANDLING PRECAUTIONS FOR ! STATIC-SENSITIVE DEVICES

This product is designed to protect sensitive components from damage due to electrostatic discharge (ESD) during normal operation. When performing installation procedures, however, take proper static control precautions to prevent damage to equipment. If you are not sure of the proper static control precautions, contact your nearest sales or service representative.

If there is any visible damage, do not attempt to install the MIM-2000F; contact your sales representative.

Installing the MIM-2000F

The MIM-2000F Micro Interface Module provides additional uplink ports for the

BSX8000-5 Broadband Services Switch or 4929 DSLAM.

MIM-2000F


Lnk 1				Act		Lnk 2				Act

05-17669

All MIMs are hot-swappable, although removal of a MIM disengages the upstream network connection for the DSLAM.

To install the MIM-2000F:

Procedure

1.Using a flat-blade screwdriver to loosen the fastening screws, remove the cover plate from the MIM port on the front of your BSX8000 or 4929 DSLAM.

CAUTION: The cover plate should be stored for possible future use. If the MIM is removed from your BSX8000 or DSLAM, it must be replaced with either another MIM or a cover plate. Do not operate a BSX8000 or DSLAM with an open MIM port.

2.Align the MIM-2000F with the module guides inside the MIM port.

MIM2-A2-GZ42-00

June 2005