Configuration Edit/Display

The Configuration Edit/Display screen is displayed when the current, customer, or default configuration is loaded and allows groups of configuration options to be displayed. To access the Configuration Edit/Display screen, follow this menu selection sequence:

Main Menu → Configuration → Current Configuration

– or –
Main Menu → Configuration →	Default Factory
main/config/edit	Hotwire
Slot: 4	Model: 87x5

CONFIGURATION EDIT/DISPLAY

Network

SYNC Port

Copy Ports

System Options

Management and Communication

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Ctrl-a to access these functions, ESC for previous menu	MainMenu	Exit
Save

Select . . .	To Access the . . .	To Configure the . . .

Network	Network Interface Options	DSL network interface
		Ports 1–4.

SYNC Port	Synchronous Data Port Options	Synchronous DTE interface,
		Ports 1–4.

Copy Ports	Copy Ports Options	DSL network and
		synchronous DTE interface
		ports by copying options
		from port to port.

System Options	System Options	General system options of
		the unit.

Management	H Telnet Session Options	Management support of the
and	H General SNMP Management	unit through SNMP and
Communication	H General SNMP Management	Telnet.
	Options	NOTE: The SNMP NMS
	H SNMP NMS Security Options	NOTE: The SNMP NMS
	H SNMP NMS Security Options	Security Options screen is
		Security Options screen is
	H SNMP Traps Options	not available in
		IP Conservative mode.

Paradyne 8785 installation instructions Configuration Edit/Display, Select To Access To Configure

Configuration Edit/Display

Default Factory

Slot: 4

CONFIGURATION EDIT/DISPLAY

Select . . .

To Access the . . .

To Configure the . . .