Installing the I/O Card
The I/O card provides the APM with DDS connections. The I/O card inserts directly behind the APM that it supports. Slot numbers are identical to facilitate correct installation.
NOTE:
For the
1.Remove the I/O card from the shipping box. Handle only by the top and bottom edges to avoid damaging the card.
2.At the rear of the housing, align the I/O card with the upper and lower tracks of the slot. Push gently towards the midplane until it stops and you cannot push the card any further.
Rear View
Screws
3.There are two captive screws on the I/O card. Alternately tighten each screw until both are snug.
9109 | OCU |
|
Port 1
PORT 1
Port | 2 |
PORT |
|
2 |
|
Port | 3 |
PORT |
|
3 |
|
Port | 4 |
PORT |
|
4 |
|
Port | 5 |
PORT |
|
5 |
|
Port | 6 |
PORT |
|
6 |
|
3