Paradyne 3172 Port Configuration Options 2 Factory Comments/Description, Both, Halt, Int, 10E-4

Table 2. Port Configuration Options (2 of 3)

Option	Factory	Comments/Description
Port LB:	Disab	Port-initiated Loopbacks, allows Loopbacks to
		be initiated through the port by the external
	DTLB
		DTE.
	DCLB
	Both
All Ones:	Disab	All ones sent to network (DTE) E1 when DTR
		or RTS interrupted.
	DTR
	RTS
	Both
Rcv RAI:	None	Data port remains enabled, or is disabled, on
(Action on Received		receiving RAI on the network interface.
	Halt
Remote Alarm
Indication)
Tx Clock:	Int	Selects whether the transmitted data clock is
		internal (TXC) or external (XTXC).
	Ext
InvertTxC:	Enab	Selects phase inversion of the transmit clock
(Invert Tx Clock)		(TXC).
	Disab
InvertData:	Enab	Allows the data on the port to be inverted.
	Disab
EDL:	Enab	Specifies whether the Embedded Data Link is
		enabled.
	Disab
Err Rate:	10E-4	Selects the error rate threshold for Excessive
(Excessive Error		Error Rate Alarm.
	10E-5
Rate)
	10E-6
	10E-7
	10E-8
	10E-9

6