OC3 Uplink
SCP cards with an OC3 uplink use an SFP transceiver that accepts an
1.Remove the plastic dustcover from the SFP socket.
2.Insert the LC connector of your fiber optic cable into the SFP socket.
3.Observing the minimum bend radius for your cable, fasten it with cable ties in such a way that it will not be kinked or snagged in the course of other cabling. If you do not know the specifications for your cable, maintain a radius of at least ten times the cable diameter.
SYSTEM
Active
Standby
Alarm
Test
ETHERNET
TX
RX
UPLINK
LK 1
6 | October 2003 |