Paradyne 3151 CSU Network Interface Configuration Options 2, General Configuration Options, Ais

Table 2. Network Interface Configuration Options (2 of 2)

Option	Factory 1	Factory 2	Comments/Description
	Enab	N/A	Network-initiated PLB allows PLB to be
NET PLB:
	Disab		controlled by FDL PLB messages.
	N/A	62411	Enforces ONEs density protection per
BitStuff:		Part68
			AT&T TR 62411, ANSI T1-403, and
			FCC Part 68 Technical Publication.
		Disab
	AIS	AIS
	One (Framed	One (Framed	Specifies the keep alive signal to send
	All Ones)	All Ones)
KeepAlive:			to the network interface on a failure of
	NetLp	NetLp	the DTE signal.
	(Loopback of	(Loopback of
	network signal)	network signal)
Yellow:	Enab	Enab	Transcodes and sends Yellow signal to
			the network on receiving Yellow from
	Disab	Disab
			DTE.
Circuit Ident:	Edit	Edit	Specifies the transmission vendor's
	Clear	Clear	circuit identifier.
	Enab	Enab	Determines whether framing bits are
CRC PThru
	Disab	Disab	passed to the DTE.
(Passthrough):

Table 3. General Configuration Options

Option	Factory 1	Factory 2	Comments/Description
	Enab	Enab	Specifies whether user-initiated
Tst Timeout:			tests are limited by the Tst Duration
	Disab	Disab
			configuration option.
	10	10
	Up	Up	Specifies in minutes the duration of
Tst Duration:
	Down	Down	user-initiated tests.
	Save	Save

Table 4. User Interface Configuration Options (1 of 4)

Option	Factory 1	Factory 2	Comments/Description
	Enab	Enab	Allows bypass of self-test on
Self-Test:
	Disab	Disab	initialization.

6