Airborne Control Center
| DHCP Fallback Subnet |
| Configures the Subnet Mask used by the DHCP fallback |
|
| algorithm. | |
|
|
| |
|
|
| Default is 255.255.255.0 |
|
|
|
|
| DHCP Fallback Gateway | Configures the gateway address used by the DHCP fallback | |
| algorithm. | ||
|
|
| |
|
|
| Default is 0.0.0.0. |
|
|
| |
| Static IP Address |
| If you use a static IP, each Bridge must have a unique IP |
|
|
| address. The IP address must adhere to the network’s subnet |
|
|
| mask and fall within the valid range of IP addresses for the |
|
|
| network. The Bridge’s static IP address must contain up to four |
|
|
| octets separated by a period. If Enable DHCP is checked, this |
|
|
| parameter is ignored. |
|
|
| Default is 0.0.0.0. |
| Subnet Mask | Bridge’s subnet mask, up to four octets separated by a period. | |
|
|
| Default is 0.0.0.0. |
|
|
| |
| Default Gateway/Router IP |
| Bridge’s LAN IP address, up to four octets separated by a |
| Address |
| period. |
|
|
| Default is 0.0.0.0. |
| Primary DNS | Sets the primary DNS server address for DNS | |
|
|
| DHCP is enabled, the IP address provided by the DHCP |
|
|
| server is used. |
|
|
| Default is 0.0.0.0. |
|
|
| |
| Secondary DNS |
| Sets the secondary DNS server address for DNS |
|
|
| when the primary DNS server is unavailable. |
|
|
| Default is 0.0.0.0. |
|
|
| |
| Discovery Settings |
| |
|
|
|
|
User Discovery Name
Sets the name_device field, which can be retrieved with the CLI name_device command.
Default is Device.
AirborneDirect™ Ethernet Bridge User's Guide | Page 39 |