Quatech SPPXP-100 user manual Appendix A, Specifications, Rev 1.00 July, Page

Page 23

Quatech ExpressCard Parallel Port Adapter User’s Manual

Appendix A

Specifications

Bus interface	PCI Express, revision 1.1
Ports	SPPXP-100:	1

PPI	Custom Parallel Peripheral Interface Controller
	with 2048 byte ECP FIFO.
Transceivers:	IEEE-1284 Output
	Voltage Swing: 0.4 – 2.4V min, 0-5V typical
	IEEE-1284 Input
	Voltage Range: –0.5V min, +5.5V max
	Input Threshold Low: 0.8V max
	Input Threshold High: 2.0V min
Connectors:	DB-25 Female

Dimensions	See drawing
Power Requirements	+3.3v = <1000mA
	+3.3v aux = 0 mA
	+1.5v = 0 mA
Temperature:	Operating: 0 to 70 C
	Storage: –50 to 80 C
Humidity	10 to 90%

OS Support	Windows XP, Windows Vista

Rev 1.00 (July 2007)

Page 19

Image 23

Contents ExpressCard Parallel Port Adapter User’s Manual SPPXP-100 QUATECH, INCUser’s Manual P/N 940-5001-100 Rev. 1.00 - July CONNECT WITH RELIABILITYlicense agreements between the purchaser and Quatech, Inc. Quatech CopyrightCopyright 1998 - 2007, Quatech, Inc. All rights are reserved. The might accompany this document can be used only in accordance with anyPage Table of contentsTable of contents Quatech ExpressCard Parallel Port Adapter User’s ManualFigures System requirements IntroductionPlease do NOT allow Windows Update Installing the Parallel Port AdapterInstalling under Windows XP be installeddisplays The installation options promptThis is the CD that shipped with the productthe Windows logo. New drivers have ‰ StepWindows displays a warning prompt if the software drivers are not signed withFigure 4 - Windows XP “please wait” message The ExpressCard Adapter installation iscomplete Figure 5 - Windows XP Finished installing promptUninstalling under Windows XP Figure 8 - Windows needs your permission to use this program prompt Installing under Windows VistaFigure 7 - Windows Vista Found new hardware prompt Windows will pop-up the next prompt prompt fig.12 The “wait while the Wizard installs thefollowed by the “Finished installing” software” prompt displays fig.11Figure 11 - Windows Vista “Installing driver software” message Figure 13 - Device Manager Uninstalling under Windows VistaTable 1 - Parallel Port Pin Assignments Making external connectionsUsing configuration utilities Figure 14 - DB-25 female parallel port connectorThe System Properties dialog box opens Using Device ManagerAccessing Device Manager Exploring Device Manager screensThe Port Settings dialog box displays for details Figure 16 illustrates the Adapter Properties, Port Settings TabSee the Setting advanced options section The Driver File Details dialog box opens The ExpressCard Parallel Port Driverproperties dialog box displays See belowCopyright date and holder installed softwareMicrosoft is the provider of the driver This is the version number of theCause TroubleshootingProblem SolutionAppendix A SpecificationsAppendix A Appendix B Warranty information