Quatech SPPXP-100 user manual ‰ Step, Windows displays a warning prompt if, from Microsoft

Page 8
‰ Step 8

Installing the software

Quatech ExpressCard Parallel Port Adapter User’s Manual

Figure 3 - Windows XP “software has not passed Windows logo testing” prompt

Figure 3 illustrates the “software has not passed Windows logo testing” prompt. This prompt will only appear in the case of a new unsigned driver.

Step

Procedure

Description

‰ Step 8

In the case of a new unsigned driver, the

Windows displays a warning prompt if

 

“software has not passed Windows logo

the software drivers are not signed with

 

testing” prompt will appear. Please click

the Windows logo. New drivers have

 

the [Continue Anyway] button to continue

been tested at our lab facilities, but may

 

with the installation.

not yet have received the official logo

 

 

from Microsoft.

‰Step 9 The Wizard locates and starts to install the necessary software.

The “wait while the Wizard installs the software” prompt displays (fig.4), followed by the “Finished installing” prompt (fig.5).

Page 4

Rev 1.00 (July 2007)

Page 7 Page 9
Image 8
Page 7 Page 9
Contents QUATECH, INC User’s Manual P/N 940-5001-100 Rev. 1.00 - JulyCONNECT WITH RELIABILITY ExpressCard Parallel Port Adapter User’s Manual SPPXP-100Copyright Copyright 1998 - 2007, Quatech, Inc. All rights are reserved. Themight accompany this document can be used only in accordance with any license agreements between the purchaser and Quatech, Inc. QuatechTable of contents Table of contentsQuatech ExpressCard Parallel Port Adapter User’s Manual PageFigures Introduction System requirementsInstalling the Parallel Port Adapter Installing under Windows XPbe installed Please do NOT allow Windows UpdateThe installation options prompt This is the CD that shipped with theproduct displays‰ Step Windows displays a warning prompt ifthe software drivers are not signed with the Windows logo. New drivers haveThe ExpressCard Adapter installation is completeFigure 5 - Windows XP Finished installing prompt Figure 4 - Windows XP “please wait” messageUninstalling under Windows XP Figure 8 - Windows needs your permission to use this program prompt Installing under Windows VistaFigure 7 - Windows Vista Found new hardware prompt Windows will pop-up the next prompt The “wait while the Wizard installs the followed by the “Finished installing”software” prompt displays fig.11 prompt fig.12Figure 11 - Windows Vista “Installing driver software” message Uninstalling under Windows Vista Figure 13 - Device ManagerMaking external connections Using configuration utilitiesFigure 14 - DB-25 female parallel port connector Table 1 - Parallel Port Pin AssignmentsUsing Device Manager Accessing Device ManagerExploring Device Manager screens The System Properties dialog box opensThe Port Settings dialog box displays for details Figure 16 illustrates the Adapter Properties, Port Settings TabSee the Setting advanced options section The ExpressCard Parallel Port Driver properties dialog box displaysSee below The Driver File Details dialog box opensinstalled software Microsoft is the provider of the driverThis is the version number of the Copyright date and holderTroubleshooting ProblemSolution CauseAppendix A SpecificationsAppendix A Warranty information Appendix B
Top Page Image Contents