Specifications

Signal format	: Based on NTSC color signal standard (MPX-CD4)
	Based on NTSC B/W signal standard (MPX-MD4)

Camera signal input synchronization Camera input terminals (IN)

Camera output terminals (OUT) VCR input terminal (VCR IN)

•Composite input

•S-VHS input terminal (S-VHS VCR IN)

VCR output terminal (VCR OUT)

•Composite output

•S-VHS output terminal (S-VHS VCR OUT)

Monitor 1 output terminal (MONITOR OUT 1)

Monitor 2 output terminal (MONITOR OUT 2)

Control terminal (CONTROL)

•Alarm input (1 – 4)

•Remote input (R1, R2)

•Alarm output (A)

•Switching input (S)

•RS-232C terminal

Full screen sequence timing

Monitor on-screen display

Menu settings

Alarm sensor

Back-up function

Operations

•Still

•Zoom

Power

Consumption

Operating environment

Dimensions

Weight

:Asynchronous

:VS/VBS, 1.0 Vp-p/75 Ω, BNC connector x 4

:Throughput of each input, 1.0 Vp-p/75 Ω, BNC connector x 4

:VS/VBS, 1.0 Vp-p/75 Ω, BNC connector x 1

:Separate YC signals, DIN connector (S terminal) x 1 (MPX-CD4 only)

Y signal: 1.0 Vp-p/75 Ω, unbalanced, synchronous; C signal: 0.286 Vp-p/75 Ω, unbalanced

:VS/VBS, 1.0 Vp-p/75 Ω, BNC connector x 1

:Separate YC signals, DIN connector (S terminal) x 1 (MPX-CD4 only)

Y signal: 1.0 Vp-p/75 Ω, unbalanced, synchronous; C signal: 0.286 Vp-p/75 Ω, unbalanced

:VS/VBS, 1.0 Vp-p/75 Ω, BNC connector x 1

Separate YC signals, DIN connector (S terminal) x 1 (MPX-CD4 only)

Y signal: 1.0 Vp-p/75 Ω, unbalanced, synchronous; C signal: 0.286 Vp-p/75 Ω, unbalanced

Camera live picture or VCR playback picture signal output: full screen, sequential display, 4 divisions split screen

:VS/VBS, 1.0 Vp-p/75 Ω, BNC connector x 1

Camera live picture signal output: full screen (can be set in (MONITOR SET) menu to display the same image as monitor 1)

:No voltage, make-contact switch input x 4 (Low input)

:2-wire type with resistance-based identification system

:DC 5 V, 5.7 kΩ (Low output)

:Low input, for input signal from SW OUT of timelapse VCR/real time recorder (as per this manufacturer specifications)

:9-pin D-SUB

:Available in full screen, 8 settings (1, 2, 3, 4, 5, 10, 20, 30 sec.)

:Title (up to 10 characters), date, time selectable

:9 menus: Language, Clock, Title, Alarm, Sensor, Timer, Display, VCR, Alarm data

:Internal, 4 channel (each camera input, selectable)

:Back-up for up to 30 days of the clock settings after connected for 30 hours continuously

:Available for camera live or VCR playback in 4 divisions split screen, full screen and zoomed in picture

Can be set using a menu to operate automatically when there is an alarm trigger

:Available for camera live or VCR playback in 4 divisions split screen, full screen and frozen picture

In full screen mode can switch from frozen to zoomed in picture

:AC 120 V, 60 Hz

:19 W (MPX-CD4), 14 W (MPX-MD4)

:Temperature: 5 to 40˚C, Humidity: 10 to 80%

:420 (W) x 44 (H) x 325 (D) mm

:Approx. 3.4 kg

Products are subject to change in design and specifications without notice and without incurring any obligation.

English

Sanyo MPX-MD4 instruction manual Specifications

Models: MPX-MD4

SPECIFICATIONS