CONNECTION
REMOTE CONTROLLER CIRCUIT CONNECTIONS
Use the layout below to make a remote controller and make the connections to the remote input pins (R1, R2) of the CONTROL terminal as indicated. This will permit remote controlled operation of this unit.
CONTROL 
G C R1 R2 C S C A C 1 2 3 4 C
RS232C
SW: switch
220Ω |
|
SW 5 | : Menu selection |
220Ω |
|
SW 6 | : VCR playback |
300Ω |
|
SW 7 | : Live picture |
360Ω |
|
SW 8 | : 4 divisions split |
470Ω | screen |
SW 9 | : Monitor 2 |
680Ω |
|
SW 10 | : Camera sequential |
820Ω | display |
SW 11 | : Zoom |
1.2kΩ |
|
SW 12 | : Still image |
220Ω
SW 1: Camera 1
220Ω
SW 2: Camera 2
300Ω
SW 3: Camera 3
360Ω
SW 4: Camera 4
INSTALLING THE RACK MOUNTING BRACKETS (SOLD SEPARATELY)
To mount this unit onto a rack, please use the rack mount hardware (model
1 Insert the head of two of the supplied bolts into the |
| |
keyhole opening on the side of the unit. | 1 | |
Insert the head of the bolt in the larger side, then slide it to | ||
the smaller side of the opening. |
| |
2 Align the slot on the mounting bracket with the two |
| |
bolts. |
| |
Make sure the bolts have not moved from their position, |
| |
then place a flat washer, a locking washer, and fix with a |
| |
nut. |
| |
NOTE: |
| |
Make sure to use the bolts provided with this unit, as the | 2 | |
bolts provided with the rack mount hardware are too short. | ||
3 Install the second mounting bracket on the opposite | ||
| ||
side, then attach the unit onto the rack using the rack |
| |
mount bolts. |
| |
| 3 | |
6 | English |
