Patton electronic 1088/K user manual Remote Digital Loop with 511/511E

Page 24

before the completion of the termination phase the switch will be ignored until it is placed back into the normal position.

Framer

Pattern

Loop

Line

Loop

Pattern

Gen/Det

Control

Control

Gen/Det

 

Processor

 

Processor

 

Framer

Figure 17. Block Remote Loop with 511/511E

Remote Digital Loop with 511/511E

The Remote Digital Loop with 511/511E is shown above. After RDL is established the Remote units' Restart Timer is set to one minute. This has been done because when the 511/511E genera- tor is started on the local unit, the Remote framer begins seeing unframed packets. The Remote unit can not distinguish the 511/ 511E pattern from the line being disconnected so the Restart Timer has been lengthened to allow the pattern generator to func- tion. Once the 511/511E test is started, the Local unit changes its' Restart Timer to one minute. The pattern originates within the Pro- cessor and is sent to the Remote unit. It is then looped back to the Local unit where it is evaluated for errors. After 45 seconds, the Pattern Generator will timeout and stops sending the pattern. The ER led will begin blinking until the user turns off the 511/511E switch.

Framer

Pattern

Loop

Line

Loop

Pattern

Gen/Det

Control

Control

Gen/Det

 

Processor

 

Processor

 

Framer

Figure 18. Block Diagram DataMode with 511/511E

Data Mode with 511/511E Pattern Generators

When the units enter DataMode it is possible to turn on the 511/ 511E pattern generators on both ends of the link. Once a 511/ 511E pattern is selected on one end of the link, the pattern genera- tor will begin transmitting unframed 511/511E through the line to the Remote end. A possible problem with this test can occur due to the Restart procedure. Once the Local 511/511E is turned on, the Remote unit begins receiving an unframed 511 pattern. If the Remote unit does not turn on the 511/511E-pattern generator within 4 seconds, the Remote unit will Restart and enter the Start-

24

Image 24
Contents User Manual Contents Page Warranty Information Radio and TV InterferenceCE Notice Service Tel +1 301 Email support@patton.comFeatures General InformationDescription Installation Configuring the Hardware DIP SwitchesConfiguration DIP Switch Set S1 S1-1 CO/CP ModeSW4 Line Framing & CodingConfiguration DIP Switch Set S2 S1-3 OptionS2-1 S2-2 S2-3 S2-4 S2-5 S2-6 DTE Rate kbps Netlink PLUG-AND-PLAY 1095RC Jumper Configuration Connect G.703 NetworkConnect Twisted Pair 120 ohm to G.703 Network Connect Dual Coaxial Cable 75 ohm to G.703 NetworkNetwork Connect TWISTED-PAIR DSL InterfacePower Connection Universal AC Power 100-240 VACVAC Power US VAC Power InternationalPOWER-UP OperationLED Status Monitors LOSTest Modes OverviewFramer Restart Procedure and Time Outs Pattern Gen/DetLoop Control Symbol Indicators Loops and PatternsLocal Loop Block Diagram Local Loop Mode 1 with 511/511E Local Loop with 511/511EBlock Diagram Remote Loop Remote Digital LoopData Mode with 511/511E Pattern Generators Remote Digital Loop with 511/511EUsing the V.52 BER Test Pattern Generator Diagnostics ConfigurationPower Appendix aLine Coding Line Rates DSL LineMdsl Physical Line RateAppendix B Model # DescriptionTransmission Distance Chart Appendix CAppendix D Model 1088/K LED DescriptionsPage Copyright Patton Electronics Company All Rights Reserved

1088/K specifications

The Patton Electronic 1088/K is a highly versatile and robust network device designed to enhance telecommunications connectivity. Known for its comprehensive feature set, the 1088/K utilizes advanced technologies that cater to various applications, making it a preferred choice for businesses and service providers alike.

One of the standout features of the Patton 1088/K is its support for a wide range of communication interfaces, including VoIP, analog TDM, and digital signaling. This flexibility allows seamless integration into existing network infrastructures, whether for legacy systems or modern IP networks. The device supports both FXS and FXO ports, enabling users to connect traditional phone systems while also providing gateway functions for VoIP services.

The 1088/K is equipped with advanced voice processing capabilities, ensuring high-definition voice quality during calls. With built-in echo cancellation and advanced jitter buffering, the device optimizes voice clarity and reduces latency, making it suitable for critical business communications.

Security features are also a significant aspect of the Patton 1088/K. The device supports robust encryption protocols, safeguarding calls and data against unauthorized access. This ensures that sensitive information transmitted over the network remains protected, which is particularly crucial for industries dealing with confidential data.

In terms of management and monitoring, the Patton 1088/K offers an intuitive web-based interface, allowing for easy configuration and real-time status monitoring. Its SNMP support provides additional capabilities for network administrators to manage multiple devices efficiently across large deployments.

The build quality of the Patton 1088/K is another notable characteristic. It is designed for reliability and durability in various environments, ensuring a long lifespan with minimal maintenance requirements. The device operates effectively in different temperature ranges, making it suitable for deployment in challenging locations.

Furthermore, the Patton 1088/K supports various protocols, including SIP, H.323, and MGCP, which enhances its interoperability with a wide range of VoIP services and devices. This makes it an excellent choice for businesses looking to transition to an all-IP solution without sacrificing compatibility with existing infrastructure.

In summary, the Patton Electronic 1088/K stands out due to its extensive features, robust security, and flexible connectivity options, making it a top choice for businesses seeking reliable communication solutions that adapt to evolving technology landscapes. Its focus on quality, performance, and ease of use ensures that it remains a valuable asset in any telecommunications network.