Patton electronic 1088/K user manual Operation, Power-Up, LED Status Monitors, Los

Page 18

5.0 OPERATION

Once the Model 1088 is properly configured and installed, it should oper- ate transparently. This sections describes power-up, reading the LED status monitors, and using the built-in loopback test modes.

5.1 POWER-UP

To apply power to the Model 1088, first be sure that you have read sec- tion 4.3, “Connect Twisted-Pair DSL Interface” on page 16, and that the unit is connected to the appropriate power source.

5.2 LED STATUS MONITORS

The Model 1088 features six front panel LEDs that monitor power, the DTE signals, network connection and test modes. Figure 10 shows the front panel location of each LED. Following Figure 10 is a description of each LEDs function. See also APPENDIX E.

 

Figure 10. Model 1088/K Front Panel

DSL LInk

(Active Green) Solid green (On) indicates that the

 

end to end DSL Framer Link is up, signifying that

 

the link across the DSL span is active. The DSL

 

Link LED is Off when the link is down.

E1/FE1

(Active Green) Solid green (On) indicates a valid

Link

E1 connection.

LOS

(Active Red) The Loss of Sync indicates that the

 

unit has lost synchronization with the incoming sig-

 

nal. This may happen when there is a framing mis-

 

match or a loss of signal. In unframed mode, the

 

LOS LED monitors the status of the transmit clock.

NS

(Active Red) The No Signal LED glows red to indi-

 

cate that the local Model 1088 is not connected

 

with the remote Model 1088.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents User Manual Contents Page Warranty Information Radio and TV InterferenceCE Notice Service Tel +1 301 Email support@patton.comFeatures General InformationDescription Installation Configuring the Hardware DIP SwitchesConfiguration DIP Switch Set S1 S1-1 CO/CP ModeSW4 Line Framing & CodingConfiguration DIP Switch Set S2 S1-3 OptionS2-1 S2-2 S2-3 S2-4 S2-5 S2-6 DTE Rate kbps Netlink PLUG-AND-PLAY 1095RC Jumper Configuration Connect G.703 NetworkConnect Twisted Pair 120 ohm to G.703 Network Connect Dual Coaxial Cable 75 ohm to G.703 NetworkNetwork Connect TWISTED-PAIR DSL InterfaceVAC Power US Power ConnectionUniversal AC Power 100-240 VAC VAC Power InternationalLED Status Monitors POWER-UPOperation LOSTest Modes OverviewFramer Restart Procedure and Time Outs Pattern Gen/DetLoop Control Symbol Indicators Loops and PatternsLocal Loop Block Diagram Local Loop Mode 1 with 511/511E Local Loop with 511/511EBlock Diagram Remote Loop Remote Digital LoopData Mode with 511/511E Pattern Generators Remote Digital Loop with 511/511EUsing the V.52 BER Test Pattern Generator Power DiagnosticsConfiguration Appendix aMdsl Physical Line CodingLine Rates DSL Line Line RateAppendix B Model # DescriptionTransmission Distance Chart Appendix CAppendix D Model 1088/K LED DescriptionsPage Copyright Patton Electronics Company All Rights Reserved

1088/K specifications

The Patton Electronic 1088/K is a highly versatile and robust network device designed to enhance telecommunications connectivity. Known for its comprehensive feature set, the 1088/K utilizes advanced technologies that cater to various applications, making it a preferred choice for businesses and service providers alike.

One of the standout features of the Patton 1088/K is its support for a wide range of communication interfaces, including VoIP, analog TDM, and digital signaling. This flexibility allows seamless integration into existing network infrastructures, whether for legacy systems or modern IP networks. The device supports both FXS and FXO ports, enabling users to connect traditional phone systems while also providing gateway functions for VoIP services.

The 1088/K is equipped with advanced voice processing capabilities, ensuring high-definition voice quality during calls. With built-in echo cancellation and advanced jitter buffering, the device optimizes voice clarity and reduces latency, making it suitable for critical business communications.

Security features are also a significant aspect of the Patton 1088/K. The device supports robust encryption protocols, safeguarding calls and data against unauthorized access. This ensures that sensitive information transmitted over the network remains protected, which is particularly crucial for industries dealing with confidential data.

In terms of management and monitoring, the Patton 1088/K offers an intuitive web-based interface, allowing for easy configuration and real-time status monitoring. Its SNMP support provides additional capabilities for network administrators to manage multiple devices efficiently across large deployments.

The build quality of the Patton 1088/K is another notable characteristic. It is designed for reliability and durability in various environments, ensuring a long lifespan with minimal maintenance requirements. The device operates effectively in different temperature ranges, making it suitable for deployment in challenging locations.

Furthermore, the Patton 1088/K supports various protocols, including SIP, H.323, and MGCP, which enhances its interoperability with a wide range of VoIP services and devices. This makes it an excellent choice for businesses looking to transition to an all-IP solution without sacrificing compatibility with existing infrastructure.

In summary, the Patton Electronic 1088/K stands out due to its extensive features, robust security, and flexible connectivity options, making it a top choice for businesses seeking reliable communication solutions that adapt to evolving technology landscapes. Its focus on quality, performance, and ease of use ensures that it remains a valuable asset in any telecommunications network.
Top Page Image Contents