E n g l i s h
Connecting the speakers
Connect the supplied speaker systems using the supplied speaker cables by matching the colours of the jacks and speaker cables.
1Press up (or down) the speaker’s jack and fully insert the stripped portion of the speaker cable into the jack, then release.
| 12 mm |
|
a | b | c |
2Connect the subwoofer’s audio input to the WOOFER LINE OUT jack and the speakers as follows :
Speakers | - | + |
Front Left (FL) | black | white |
Front Right (FR) | black | red |
Centre (C) | black | green |
|
|
|
Surround Left (SL) | black | blue |
|
|
|
Surround Right (SR) | black | grey |
|
|
|
Notes:
–Ensure that the speaker cables are correctly connected. Improper connections may damage the system due to short- circuit.
–For optimal sound performance, use the supplied speakers.
–Do not connect more than one speaker to any one pair of +/- speaker jacks.
–Do not connect speakers with an impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual.
Connecting a TV and additional components
You must connect a TV to the DVD system in order to use the DVD player. You can connect other audio and audio/ visual components to the DVD system in order to use the Home Cinema Audio System’s surround sound capabilities.
IMPORTANT!
–There are various ways to connect the system to a TV (as shown in the illustration).You only need to make one of the best connections, depending on the capabilities of your TV system.
–Always refer to the instruction manual of the connected equipment to make an optimal connection.
–Some DVD discs have
you will not able to record the disc through a VCR.
●Use the supplied audio cables to connect AUDIO IN jacks to the corresponding AUDIO OUT jacks on the TV,VCR or other audio/visual components.
●Use the supplied Scart cable to connect SCART OUT jack to the corresponding SCART VIDEO IN jack on a TV.
If your TV is not equipped with a Euroconnector, you can select one of the following alternative connections :
Option 1
Connect the
Option 2
Connect the VIDEO OUT jack to the video input jack on the TV using a video cable (not supplied).
Use the AUDIO OUT jacks
–for connecting to an amplifier, audio system or TV with analogue audio inputs.
–for connecting to a CD or Tape recorder to make an analogue recording.
Use the OPTICAL or COAXIAL jacks
–for connecting to an amplifier with DTS, Dolby Digital decoder or CD recorder.
You will need to set the DVD system’s digital output to “ALL” (refer to “Preparations - System setup (DVD)”).
Notes:
–MP3 audio is not available on the digital output.
–Digital recording is only possible on a CD or VCD.
oror
| MW |
|
|
|
|
|
|
| CENTER | AUDIO OUT | AUDIO IN |
| VIDEO | ||
| LINE OUT |
| |||||
|
|
|
|
|
| OUT | OUT |
|
|
|
| L | DIGITAL OUT |
| |
FM |
|
|
|
|
|
|
|
(75 ) |
|
|
|
|
|
|
|
|
|
|
| R |
|
|
|
MW/FM | WOOFER |
| TV | AUX | OPTICAL | COAXIAL |
|
ANTENNA | LINE OUT |
|
| ||||
or | A | |
| C | |
| O | |
O | X | |
IA | ||
P | ||
T | L | |
IC | IN | |
A |
| |
L |
| |
IN |
|
10CONNECTIONS
pg | 10 | 4/16/02, 1:21 PM |