Philips LX-3000D Other Functions, Tuning to radio stations Listening to preset radio, Stations

Page 21

 

 

 

Other Functions

 

 

 

 

 

 

Tuning to radio stations

Listening to preset radio

1

Press STANDBY ON to switch on the last selected

 

stations

 

source.

In tuner mode, press 1 or 2 or use the numeric keypad

2

Adjust SOURCE (or press TUNER) to select TUNER

 

(0-9)to select the desired preset number.

 

mode.

 

The preset number, radio frequency, and waveband are

3

Press TUNER again to select the desired band : FM, MW

 

displayed.

 

or LW.

 

 

 

E n g l i s h

4Press and hold S or T until the frequency indication starts to change, then release.

The system automatically tunes to the next strong radio station.

To tune to a weak station, press S or T briefly and repeatedly until an optimal reception is found.

5Repeat step 4 if necessary until you find the desired radio station.

Presetting radio stations

You can preset up to 40 stations regardless of the reception.

1Tune to your desired radio station (refer to “Tuning to radio stations”).

2Press PROGRAM.

“Program” appears.

Program

3Use the numeric keypad (0-9)to select the desired preset number.

Sleep timer setting

The sleep timer enables the system to switch to standby mode automatically at a preset time.

1Press SLEEP repeatedly to select a preset time.

The selections are as follows (time in minutes):

15 30 45 60 90 120OFF 15...

2When you reach the desired length of time, stop pressing the SLEEP button.

“Sleep” icon appears.

To check the remaining length of time after sleep timer is activated

Press SLEEP once.

To change the preset sleep timer

Press SLEEP again while the remaining sleep timer is shown.

The display will show the next sleep timer options.

To deactivate the sleep timer

Press SLEEP repeatedly until "OFF" is displayed, or press the STANDBY ON button.

Program

Note:

If “Program” icon goes off before you select the desired preset number, press PROGRAM again.

4Press PROGRAM again to store the radio station.

Repeat steps 1–4to store other radio stations.

Notes:

If you attempt to programme more than 40 preset radio stations, "FULL" is displayed.

During programming, if no key is pressed within five seconds, the system will exit the programme mode automatically.

OTHER FUNCTIONS 21

pg 001-023/LX3xxx/22-Eng

21

4/16/02, 1:22 PM

Image 21
Contents LX-3000D Dichiarazione DI CONFORMITA’ Important NoteKlass 1 laseraparat Luokan 1 laserlaitePolski 215 IndexLaser Contents Introduction and General Information Front and Rear panels Functional OverviewRemote Control Connections Connecting antennasMW Indoor Loop Antenna FM Indoor AntennaConnecting the speakers Connecting a TV and additional componentsOption Switching on the system Setting up the surround sound systemPreparations System Setup DVD Setting up the subwooferSetting the picture TV Shape 43 LBPAL NtscRating 1 to Rating no ParentVolume control Selecting the surround sound modeBasic Functions Selecting the digital sound effectOperations Discs informationBasic playback Repeat play Programme function can also be accessed via the menu barFor DVD Repeat chapter/title/disc For VCD/CD/MP3-CD Repeat track/discFor VCD Special VCD/SVCD features Special MP3-CD features If the MP3-CD menu is switched offMP3-CD menu Presetting radio stations Tuning to radio stations Listening to preset radioSleep timer setting Other FunctionsAmplifier Section SpecificationsNo picture Troubleshooting