Patton electronic 2110 user manual Installation, Typical application

Page 7

Figure 1. Typical application

When using a Model 2110, in conjunction with a PoE Switch, the user extends the 802.3af PoE and 10/100 Ethernet an additional 100 meters (328ft). POE-enabled IP Cameras can be placed 200 feet away from the Ethernet switch and can be powered up via PoE by the 2110. (See Table 2 on page 11 for power and distance specifications).

3.0 INSTALLATION

The Interconnecting cables shall be acceptable for

external use and shall be rated for the proper applica-

tion with respect to voltage, current, anticipated tem-

CAUTION perature, flammability, and mechanical serviceability.

To install the 2110 PoE Booster, do the following:

1.Connect the Ethernet interface (refer to section 3.1, “Connecting the 10/100Base-T Ethernet Interface” on page 8).

2.EUI Models only: Connect the power plug (refer to section 3.2, “Con- necting Power (EUI Models)” on page 9)..

7

Image 7
Contents User Manual Contents EMC Compliance Warranty InformationSafety Compliance ComplianceCE Declaration of Conformity Radio and TV Interference FCC PartAuthorized European Representative Safety When Working with Electricity ServiceGeneral Information FeaturesDescription Typical application InstallationModel Front and Top Power UP Connecting Power EUI ModelsOperation LED LED Status MonitorsPower VS. Distance LED Status IndicatorsPower Operating TemperaturePatton Model # Description Appendix B