Patton electronic 2172 Connecting Power, Configuration, Configuring the Hardware DIP Switches

Page 12

3.3 CONNECTING POWER

The Interconnecting cables shall be acceptable for

external use and shall be rated for the proper applica-

tion with respect to voltage, current, anticipated tem-

CAUTION perature, flammability, and mechanical serviceability.

The Model 2172 does not have a power switch, so it powers up as soon as it is plugged in.

An external AC or DC power supply is available separately. This connec- tion is made via the barrel jack on the rear panel of the Model 2172. No configuration is necessary for the power supply (See Appendix B for domestic and international power supply and cord options).

DC power (supplied via the power supply jack to the 2172) must meet the following requirements; DC power supplied must be regulated +5VDC ±5%, 1.0A minimum. Center pin is +5V. The barrel type plug has a 2.5/5.5/10mm I.D./O.D./Shaft Length dimensions.

4.0 CONFIGURATION

The Model 2172 has eight DIP switches for configuring the unit for a wide variety of applications. This section describes switch locations and explains the different configurations.

4.1 CONFIGURING THE HARDWARE DIP SWITCHES

Using a small flat-tip screwdriver, remove the protective cover located on the underside of the Model 2172 (see Figure 6).

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents User Manual Contents Distance Chart, Based on 24 AWG 0.5 MM Warranty Information ComplianceRadio and TV Interference FCC Part Service Declaration of ConformitySafety When Working with Electricity Features General InformationDescription Installation Typical applicationConnecting the TWISTED-PAIR Line Interface 2172 RJ-45 Terminal blockRing Connecting the 10/100BASE-T Ethernet Interface Model 2172 Terminal Block twisted pair line interfaceConnecting Power ConfigurationConfiguring the Hardware DIP Switches Switch toggle Configuring DIP Switch S2 Position DescriptionS2-2 S2-3 Asymmetric Line Rates DS/US Power UP OperationFront Panel LED Status Monitors LED LinkLED Status Indicators Power SupplyTemperature Range DimensionsAppendix B Base ModelsAppendix C 10/100BASE-T InterfaceCopperlink Interface Appendix D DS/US

2172 specifications

The Patton Electronics 2172 is a robust and versatile T1 and E1 interface solution designed for a variety of telecom and data applications. This device serves as a bridge between legacy telecommunications infrastructures and modern digital networks, making it particularly valuable for businesses looking to maintain connectivity while upgrading their systems.

One of the standout features of the Patton 2172 is its ability to support both T1 and E1 lines, providing flexibility for users across different regions and service requirements. The device comes equipped with two RJ-48 ports, enabling easy integration into existing telephony setups. With a user-friendly interface, configuration is straightforward, ensuring that system administrators can quickly adapt settings according to their specific needs.

The Patton 2172 employs advanced technologies, such as Adaptive Jitter Buffering and standards-based echo cancellation, which enhance voice quality and minimize latency issues that can arise during data transmission. These features are particularly important for businesses that rely on Voice over IP (VoIP) solutions, as they help ensure clear communication without interruptions.

In addition to its voice capabilities, the 2172 supports various data protocols, including Frame Relay and PPP. This makes it an ideal choice for organizations that require reliable data connectivity alongside voice services. The device also incorporates advanced diagnostics and monitoring features that assist in troubleshooting and network management, enabling IT professionals to maintain optimal performance and uptime.

Another noteworthy characteristic of the Patton 2172 is its compact, rack-mountable design. This feature allows for easy installation in data centers or telecom closets, making it an efficient choice for space-constrained environments. Power over Ethernet (PoE) capability further simplifies deployment, eliminating the need for separate power sources.

In summary, the Patton Electronics 2172 offers a powerful combination of features, flexibility, and reliability. With its support for both T1 and E1 lines, advanced voice technologies, and data protocol compatibility, this interface solution is well-suited for enterprises aiming to enhance their telecommunications infrastructure. Its user-friendly interface, along with compact design and PoE options, makes it an attractive solution for various networking environments.
Top Page Image Contents