Patton electronic 2172 user manual S2-2 S2-3 Asymmetric Line Rates DS/US

Table 4: Asymmetric CopperLINK Line Rates Selection Chart

S2-2	S2-3	Asymmetric Line Rates DS/US
ON	ON	50 Mbps/2 Mbps
ON	OFF	16 Mbps/2 Mbps
OFF	OFF	4 Mbps/1 Mbps

Switches S2-4, S2-5 and S2-6: Ethernet Configuration

Use switches S2-4, S2-5 and S2-6 to configure Ethernet settings.

Table 5: Ethernet configurations

S2-4	S2-5	S2-6	Ethernet Configurations
ON	ON	ON	Auto-Negotiate
ON	ON	OFF	100Mb Full Duplex
ON	OFF	ON	100Mb Half Duplex
ON	OFF	OFF	10Mb Full Duplex
OFF	ON	ON	10Mb Half Duplex

Switch S2-7: Ethernet Shutdown

Use switch S2-7 to enable or disable Ethernet Shutdown. When Ethernet Shutdown is enabled, the 2172 will disable the Ethernet interface when there is no CopperLINK link detected. When Ethernet Shutdown is dis- abled, the Ethernet interface will always be enabled.

	Table 6: Ethernet Shutdown
S2-7	Description
ON	Ethernet Shutdown Enabled
OFF	Ethernet Shutdown Disabled

Switch S2-8: Remote Configuration

Use switch S2-8 to enable or disable Remote Configuration.

	Table 7: Ethernet Shutdown
S2-8	Description
ON	Remote Configuration Enabled
OFF	Remote Configuration Disabled

Note The S2-8 switch applies to the R unit only. If enabled, the R will follow the dip switch configuration of the L unit. If disabled, the R unit will use its own dip switch setting to determine its Ethernet

15