Patton electronic 2040 manual Featuress, Ordering Info, 35/X.21/RS-530-to-HSSI Converters

FEATURESS

Bi-Directional HSSI (High Speed Serial Interface) Conversion

Three Models to Choose From: Patton 2040 - V.35 to HSSI

Patton 2041 - X.21 to HSSI (pictured) Patton 2042 - RS-530to HSSI

SPECIFICATIONSI I I

Data Format: Synchronous

Standards: Converts CCITT V.35, CCITT X.21 or EIA-530 to HSSI (ANSI/TIA/EIA-613, December, 1993 & ANSI/TIA/EIA-613, November, 1993)

Data Rate: 0 - 10 Mbps

Clocking: All clocking modes supported except con- version from smooth to gapped clock

Loopbacks: Local line and remote line supported; Local DTE not available

Interfaces: V.35, X.21 or RS-530 DTE to HSSI

Supports Synchronous Data Rates

up to 10 Mbps

Transparent to Protocol–Passes Data, Control Lines and Two Loopback Modes

Integral 6 ft (1.8 m) Cable

Two Versions: DCE-to-DTE and

DTE-to-DCE

External AC Power Supply

DCE; V.35 X.21 or RS-530 DCE to HSSI DTE (see ordering information)

Connectors: Male HD/Slimline 50-pin (HSSI); Male M/34 (V.35), Female DB-15 (X.21) or Male DB-25 (RS-530)

Cable: 6 ft (1.8 m)

Temperature Range: 32-122°F(0-50°C)

Altitude: 0-15,000 feet (4.5Km)

Humidity: Up to 95% non-condensing

Power Supply: External AC transformer, 100-240VAC (Universal Input), IEC-320 connector

Dimensions: Patton 2040 - 4.90” x 2.00” x 0.73” (12.45 cm x 5.08 cm x 1.85 cm); Patton 2041 and Patton 2042 - 3.40” x 2.00” x 0.73” (8.63 cm x 5.08 cm x 1.85 cm)

ORDERING INFO

Patton 2040 Series

V.35/X.21/RS-530-to-HSSI Converters

2040MT-MC/UI	(M/34 male, V.35 DTE configuration) to (HD-50male, HSSI DCE configuration),
	Universal Input Power Supply (100 - 240VAC)
2040MC-MT/UI	(M/34 male, V.35 DCE configuration) to (HD-50male, HSSI DTE configuration),
	Universal Input Power Supply (100 - 240VAC)
2041FT-MC/UI	(DB-15female, X.21 DTE configuration) to (HD-50male, HSSI DCE configuration),
	Universal Input Power Supply (100 - 240VAC)
2041FC-MT/UI	(DB-15female, X.21 DCE configuration) to (HD-50male, HSSI DTE configuration),
	Universal Input Power Supply (100 - 240VAC)
2042MT-MC/UI	(DB-25male, RS-530 DTE configuration) to (HD-50male, HSSI DCE configuration),
	Universal Input Power Supply (100 - 240VAC)
2042MC-MT/UI	(DB-25male, RS-530 DCE configuration) to (HD-50male, HSSI DTE configuration),
	Universal Input Power Supply (100 - 240VAC)

7622 Rickenbacker Dr., Gaithersburg, MD 20879

Phone: (301) 975-1000 • Fax: (301) 869-9293 • E-mail: sales@patton.com • WWW: http://www.patton.com