APPENDIX B
PATTON ELECTRONICS MODEL 1094
CABLE RECOMMENDATIONS
The Patton Model 1094 operates at frequencies of 512 kHz or less and has been performance tested by Patton technicians using
Wire Gauge | Capacitance | Resistance |
19 AWG/0.9mm | 83nF/mi or 15.72 pF/ft. | .0163 Ohms/ft. |
22 AWG/0.6mm | 83nF/mi or 15.72 pF/ft. | .0326 Ohms/ft. |
24 AWG/0.5mm | 83nF/mi or 15.72 pF/ft. | .05165 Ohms/ft. |
26 AWG/0.4mm | 83nF/mi or 15.72 pF/ft. | .08347 Ohms/ft. |
To gain optimum performance from the Model 1094 Series, please keep the following guidelines in mind:
•Always use twisted pair wire—this is not an option.
•Use twisted pair wire with a capacitance of 20pF/ft or less.
•Avoid twisted pair wire thinner than 26 AWG (i.e. avoid higher AWG numbers than 26).
•Use of twisted pair with a resistance greater than the above specifications may cause a reduction in maximum distance obtainable. Functionality should not be affected.
•Many environmental factors can affect the maximum distances obtainable at a particular site. Use the data rate/distance table (below) as a general guideline only.
Model 1094 Distance Table in Miles (km)
Data Rate |
| Wire Gauge |
| |
|
|
|
| |
(kbps) | 19 AWG | 22 AWG | 24 AWG | 26 AWG |
| ( 0.9 mm) | (0.6mm) | (0.5 mm) | (0.4 mm) |
384 | 4.9(7.9) | 3.4(5.5) | 2.7(4.3) | 1.9(3.1) |
768 | 3.1(4.9) | 2.2(3.5) | 1.8(2.9) | 1.3(2.0) |
|
|
|
|
|
APPENDIX C
PATTON ELECTRONICS MODEL 1094
FACTORY REPLACEMENT PARTS
AND ACCESSORIES
Patton Model # | Description |
0805US | American Power Cord |
0805EUR | European Power Cord CEE 7 |
0805UK | United Kingdom Power Cord |
0805AUS | Australia/New Zealand Power Cord |
0805DEN | Denmark Power Cord |
0805FR | France/Belgium Power Cord |
0805IN | India Power Cord |
0805IS | Israel Power Cord |
0805JAP | Japan Power Cord |
0805SW | Switzerland Power Cord |
07M1090SVC | Service Manual |
07M1094 | User Manual |
19 | 20 |