Patton electronic IM2RC/F CE Notice, Service, General Information, Features, Description

Page 3

1.2 CE NOTICE

The CE symbol on your Patton Electronics equipment indicates that it is in compliance with the Electromagnetic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the Union European (EU). A Certificate of Compliance is available by contacting Technical Support.

1.3 SERVICE

All warranty and non-warranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have a Return Materials Authorization number on the outside of the shipping container. This number may be obtained from Patton Electronics Technical Services at:

Telephone: (301) 975-1007;

Web Address: http://www.patton.com;

email: support@patton.com.

NOTE: Packages received without an RMA number will not be accepted.

Patton Electronics' technical staff is also available to answer any questions that might arise concerning the installation or use of your

Model IM2RC/F. Technical Service hours: 8AM to 5PM EST, Monday through Friday.

2.0 GENERAL INFORMATION

Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warranted for One Year parts and labor. If any questions arise during installation or use of this product, please contact Patton Electronics Technical Support at: (301) 975-1007.

2.1 FEATURES

Designed for use with Patton Electronics short range modem access products that receive Patton’s Rear Card modules and support 64k/128k synchronous data rates

Compliant with ITU-T G.703 electrical specifications

120 ohm RJ-45 Network Termination

Complies with ITU-T G.823 Jitter Control Specifications

Supports Clear Channel or Octet Timing Modes

Built-in Transformer Isolation and Surge Protection

Supports Network or Modem Timing

Fits in Patton’s 2u (3.5”) rack chassis and cluster boxes

Made in the U.S.A.

2.2 DESCRIPTION

The Patton Model IM2RC/F is a rack-mountable rear card that provides Patton baseband modems with an interface to the G.703 PCM network. With the IM2RC/F you can achieve high speed G.703 network extension, dedicated high speed internet access, remote LAN access,...the possibilites are endless! Supporting 64 kbps clear channel or 128 kbps octet mode data streams, the IM2RC/F can set its own clock or it take clocking from the G.703 network.

The Model IM2RC/F meets baseband modem function cards such as 1092ARC, 1045RC and 2500RC in the mid-plane of Patton’s 2U (3.5”) rack chassis. G.703 access is accomplished via a 120 Ohm RJ- 45 jack. 2 or 4 Wire twisted pair Line connections are made via a second RJ-45 jack.

The Model IM2RC/F features on-board transformer isolation and surge protection as well as compliance with ITU-T G.823 Jitter Control Specifications.

3

4

Image 3
Contents User Manual Table of Contents Warranty InformationRadio and TV Interference General Information ServiceFeatures CE NoticeSwitch S2 Operation Mode Configuration Configuring the IM2RC/F Hardware SwitchesSwitch Summary Table Position Function Factory DefaultSwitches S3 Timing Mode Switch S6 Operation ModeConnecting the Interface Driver Board Installation Model 1000R16 Rack Chassis Rack Power SupplyInstalling the Rear IM2RC/F Card and Front Function Card Connecting to a G.703 PCM Network Channel Connecting the Line InterfaceMaking Interface Connections Typical Application Two-Wire and Four-Wire Cable Connection Via RJ-45Signal PIN# Signal PIN# OperationAppendix B Patton IM2RC/F Cable Recommendations SpecificationsAppendix a Patton IM2RC/FPatton Model # Description RJ45 Female Connector Pin Number SignalCopyright Patton Electronics Company All Rights Reserved