4.0 INSTALLATION
The sections on the next page describe installing the following:
•Model 460 (see section 4.1, “Installing the Model 460” on page 8)
•Model
Refer to the appropriate section to install your unit.
4.1 INSTALLING THE MODEL 460
Do the following:
1.Refer to the pin configuration below when assembling the cable that will connect to the
2.Plug the modular cable connector into the
| Function |
|
|
1 and 2 | TX pair |
3 | TX shield |
|
|
4 and 5 | RX pair |
|
|
6 | RX shield |
|
|
3.Connect the coaxial cables to the TX Out and RX In connectors. Congratulations, you have finished installing the Model 460!
4.2INSTALLING THE MODEL 460-TBP
Do the following:
1.Strip the outer jacket insulation from the twisted pairs about 1 inch.
2.Strip back the insulation on each of the wires about 0.25 inches.
8