APPENDIX C
FACTORY PARTS AND ACCESSORIES
C-1 Basic Standalone Units
The Patton Model
All versions of the Model
Standard power supply option, |
|
switchable between 115 and 230 VAC | Model |
Universal Interface power supply option, |
|
operates in environments ranging from |
|
85 to 265 VAC | Model |
DC power supply option, |
|
operates in 48 VDC environments, |
|
equipped with a |
|
for DC power connection | Model |
C-2 AC Power Cords
Power cord must be specified when ordering Models
Ordering Suffix (*) | Power Cord Description |
A | Continental Europe, CEE 7 |
C | Australia, New Zealand |
D | United Kingdom |
E | Denmark |
F | France/Belgium |
G | India |
H | Israel |
I | Italy |
J | Japan |
K | North America |
L | Switzerland |
Example:
17
APPENDIX D
SAFETY WARNINGS AND REQUIREMENTS
These warning notices apply to the Input Port, the port marked “Network”.
Warning: The port marked “SAFETY WARNING: see instructions for use” does not provide isolation sufficient to satisfy the requirements of BS6301; apparatus connected directly to this port should either have been approved to BS6301 or have previously been evaluated against British Telecommunications plc (Post Office) Technical Guides 2 or 26 and given permission to attach. Any other usage will invalidate the approval of the Interface Module.
Interconnection of the Interface Module (the port marked “Network”) directly, or by way of any other apparatus, with ports on other apparatus (marked or not so marked) may produce hazardous conditions on the network. Users should seek advice from a competent engineer before such a connection is made.
The Interface Module is approved as a Host Independent Appliqué. As such the Interface Module is only approved for use with a host, and with host attachments, that are either type approved in their own right, or, if supplied after March, 1989, are covered by terms of the General Approval number NS/G/1234/J/100003. A Host supplied under the terms of the General Approval number NS/G/1234/J/100003 satisfies the conditions of the paragraph above.
The Interface Module must not be modified in any way. Any form of modification invalidates the approval for connection, and the Patton warranty of the unit.
The terms of the approval require that there must be a minimum distance (5mm) between the Interface Module and any other part of the host, including other Interface Modules. This condition is met by default when the Appliquè is installed in a Patton enclosure in accordance with the instructions. If voltages greater than 250V are present in the host , users should refer to a competent safety engineer for advice.
It is a condition of the approval that a copy of these user instructions and safety warnings must be supplied with the host. Failure to provide the Interface Module user instructions with the host will invalidate the Appliquè approval.
Failure to install the Interface Module in accordance with these instructions will invalidate the approval. If you experience difficulties, or are in any doubt, please contact your Patton representative.
18