Model 3231 CLI Reference Guide | 8 • IP Commands |
|
|
ip set interface
Configure specific settings for an IP interface.
Note Begin each
ip set interface <name>.
|
| Table 69. ip set interface <name> | |
|
|
|
|
| Command |
| Explanation |
|
|
|
|
dhcp | disabled |
| The interface does not use DHCP client information. |
|
|
|
|
| enabled |
| The interface obtains its configuration information from |
|
|
| the DHCP client. |
|
|
|
|
ipaddress | <ipaddress> |
| Set the IP address for the existing IP interface. |
|
|
|
|
| <ipaddress> | <netmask> | Set the netmask address of the interface. |
|
|
|
|
mtu | <mtu> |
| Set the MTU (Maximum Transmission Unit) for an existing |
|
|
| IP interface. |
|
|
|
|
netmask | <netmask> |
| Set the netmask for an existing IP interface. |
|
|
|
|
rip | accept | all | Set the interface to accept RIP version 1 and RIP version 2 |
|
|
| messages. |
|
|
|
|
|
| none | The interface does not accept RIP messages. |
|
|
|
|
|
| v1 | Set the interface to accept only RIP version 1 messages. |
|
|
|
|
|
| v2 | Set the interface to accept only RIP version 2 messages. |
|
|
|
|
| multicast | disabled | Disable RIP version 2 messages from being sent via multi- |
|
|
| cast. |
|
|
|
|
|
| enabled | Allow RIP version 2 messages to be sent via multicast. |
|
|
|
|
| send | all | Send RIP version 1 and RIP version 2 messages from the |
|
|
| interface. |
|
|
|
|
|
| none | The interface does not accept RIP messages. |
|
|
|
|
|
| v1 | Send only RIP version 1 messages from the interface. |
|
|
|
|
|
| v2 | Send only RIP version 2 messages from the interface. |
|
|
|
|
tcpmssclamp | disabled |
| The IP stack will not examine or modify TCP traffic routed |
|
|
| through the interface. |
|
|
|
|
| enabled |
| Examine and modify TCP SYN packets that are routed |
|
|
| through the interface. |
|
|
|
|
ip set interface | 93 |